Hwy 026 (OR 35)
Carrying Hwy 026 (OR 35) over Irrigation Ditch
0.9 MI S MT HOOD PO, Hood River, Oregon
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: Hwy 026 (OR 35)
The Hwy 026 (OR 35) bridge in Hood River, Oregon carries Hwy 026 (OR 35) over Irrigation Ditch. It was built in 1961, making it 65 years old today. The structure is built primarily of concrete continuous and spans 2 sections, stretching 6.7 meters (22 feet) end to end. Daily traffic averages 1,951 vehicles, placing it in the moderately-trafficked tier of Oregon bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show culvert at 7/9. The weakest component sits in good condition. All reported major components score above the Poor range. Its NBI inventory load rating is 23.0 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How Hwy 026 (OR 35) compares
Live comparison across Oregon.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1961
- Material
- Concrete Continuous
- Number of Spans
- 2
- Structure Length
- 6.7 m (22 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 1,951 vehicles/day
- Structure Number
- 0M039 026 08394
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether Hwy 026 (OR 35) is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare Hwy 026 (OR 35) against other structures in Hood River and across Oregon. Oregon bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for Hwy 026 (OR 35)?
Hwy 026 (OR 35) in Hood River, Oregon on the FHWA's 0–9 scale.
How often is Hwy 026 (OR 35) inspected?
Hwy 026 (OR 35)'s responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 1,951 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. Hwy 026 (OR 35) is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for Hwy 026 (OR 35)?
Hwy 026 (OR 35) has an NBI inventory load rating of 23.0 metric tons.
Who is responsible for maintaining Hwy 026 (OR 35)?
Hwy 026 (OR 35) is owned and maintained by State Highway Agency.
How old is Hwy 026 (OR 35) and does age affect safety?
Hwy 026 (OR 35) was built in 1961, making it 65 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.