FHWA NBI 2024 Inspection record Public-domain dataset

STILLMAN VALLEY RO

Carrying STILLMAN VALLEY RO over CANAL CREEK

0.1 MI N CONDON ROAD, Winnebago, Illinois

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Good
31 t Inventory load rating

Bridge Snapshot: STILLMAN VALLEY RO

The STILLMAN VALLEY RO bridge in Winnebago, Illinois carries STILLMAN VALLEY RO over CANAL CREEK. It was built in 1977, making it 49 years old today. The structure is built primarily of concrete and spans 3 sections, stretching 12.5 meters (41 feet) end to end. Daily traffic averages 300 vehicles, placing it in the lower-traffic tier of Illinois bridges. It is owned and maintained by Town/Township Highway Agency.

The latest FHWA inspection records show culvert at 7/9. The weakest component sits in good condition. All reported major components score above the Poor range. Its NBI inventory load rating is 31.1 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How STILLMAN VALLEY RO compares

▼ 3.5
Load rating vs Illinois average (34.6 t)
Bottom 22%
Lower load rating than 78% of Illinois bridges
475
Bridges in Winnebago · 29 in Poor condition
STILLMAN VALLEY RO 31.1 t
Illinois average 34.6 t

Live comparison across Illinois.

Historical Sufficiency Rating

PlainBridge-computed
96.4 / 100 - historical 80–100 band
Structural adequacy /55
54.5
Serviceability /30
30.0
Essentiality /15
14.9
Special reductions
−3.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Culvert
7/9
Good (7–9)
Inventory Load Rating
31.1 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1977
Material
Concrete
Number of Spans
3
Structure Length
12.5 m (41 ft)
Owner
Town/Township Highway Agency
Avg Daily Traffic
300 vehicles/day
Structure Number
101508600000000

How to read this record

This page shows what the last federal inspection recorded, not whether STILLMAN VALLEY RO is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare STILLMAN VALLEY RO against other structures in Winnebago and across Illinois. Illinois bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for STILLMAN VALLEY RO?

STILLMAN VALLEY RO in Winnebago, Illinois on the FHWA's 0–9 scale.

How often is STILLMAN VALLEY RO inspected?

STILLMAN VALLEY RO's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 300 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. STILLMAN VALLEY RO is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for STILLMAN VALLEY RO?

STILLMAN VALLEY RO has an NBI inventory load rating of 31.1 metric tons.

Who is responsible for maintaining STILLMAN VALLEY RO?

STILLMAN VALLEY RO is owned and maintained by Town/Township Highway Agency.

How old is STILLMAN VALLEY RO and does age affect safety?

STILLMAN VALLEY RO was built in 1977, making it 49 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.