Sunset Point
Carrying Sunset Point over White Peak Wash & Ped
0.8 mi W. Jct Vistancia, Maricopa, Arizona
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: Sunset Point
The Sunset Point bridge in Maricopa, Arizona carries Sunset Point over White Peak Wash & Ped. It was built in 2006, making it 20 years old today. The structure is built primarily of concrete continuous and spans 2 sections, stretching 6.4 meters (21 feet) end to end. Daily traffic averages 1,971 vehicles, placing it in the moderately-trafficked tier of Arizona bridges. It is owned and maintained by City/Municipal Highway Agency.
The latest FHWA inspection records show culvert at 7/9. The weakest component sits in good condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 38.1 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How Sunset Point compares
Live comparison across Arizona.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2006
- Material
- Concrete Continuous
- Number of Spans
- 2
- Structure Length
- 6.4 m (21 ft)
- Owner
- City/Municipal Highway Agency
- Avg Daily Traffic
- 1,971 vehicles/day
- Structure Number
- 10613
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether Sunset Point is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare Sunset Point against other structures in Maricopa and across Arizona. Arizona bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for Sunset Point?
Sunset Point in Maricopa, Arizona on the FHWA's 0–9 scale.
How often is Sunset Point inspected?
Sunset Point's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 1,971 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. Sunset Point is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for Sunset Point?
Sunset Point has an NBI inventory load rating of 38.1 metric tons.
Who is responsible for maintaining Sunset Point?
Sunset Point is owned and maintained by City/Municipal Highway Agency.
How old is Sunset Point and does age affect safety?
Sunset Point was built in 2006, making it 20 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.