Florence-Kelvin Hw
Carrying Florence-Kelvin Hw over Gila River
1.3 mi S Jct SR 177, Pinal, Arizona
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: Florence-Kelvin Hw
The Florence-Kelvin Hw bridge in Pinal, Arizona carries Florence-Kelvin Hw over Gila River. It was built in 2018, making it 8 years old today. The structure is built primarily of prestressed concrete continuous. Daily traffic averages 101 vehicles, placing it in the lower-traffic tier of Arizona bridges.
The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. All reported major components score above the Poor range.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How Florence-Kelvin Hw compares
Live comparison across Arizona.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2018
- Material
- Prestressed Concrete Continuous
- Avg Daily Traffic
- 101 vehicles/day
- Structure Number
- 10645
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether Florence-Kelvin Hw is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare Florence-Kelvin Hw against other structures in Pinal and across Arizona. Arizona bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for Florence-Kelvin Hw?
Florence-Kelvin Hw in Pinal, Arizona on the FHWA's 0–9 scale.
How often is Florence-Kelvin Hw inspected?
Florence-Kelvin Hw's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 101 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. Florence-Kelvin Hw is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for Florence-Kelvin Hw?
An inventory load rating is not recorded for Florence-Kelvin Hw.
Who is responsible for maintaining Florence-Kelvin Hw?
Ownership is not specified for Florence-Kelvin Hw in the NBI.
How old is Florence-Kelvin Hw and does age affect safety?
Florence-Kelvin Hw was built in 2018, making it 8 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.