E 3rd Street
Carrying E 3rd Street over Ruby Wash
0.4 mi W Jct SR 87, Navajo, Arizona
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: E 3rd Street
The E 3rd Street bridge in Navajo, Arizona carries E 3rd Street over Ruby Wash. It was built in 1953, making it 73 years old today. The structure is built primarily of concrete continuous and spans 10 sections, stretching 32.9 meters (108 feet) end to end. Daily traffic averages 7,400 vehicles, placing it in the moderately-trafficked tier of Arizona bridges. It is owned and maintained by City/Municipal Highway Agency.
The latest FHWA inspection records show culvert at 6/9. The weakest component sits in fair condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 31.8 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How E 3rd Street compares
Live comparison across Arizona.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1953
- Material
- Concrete Continuous
- Number of Spans
- 10
- Structure Length
- 32.9 m (108 ft)
- Deck Width
- 18.3 m (60 ft)
- Owner
- City/Municipal Highway Agency
- Avg Daily Traffic
- 7,400 vehicles/day
- Structure Number
- 10973
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether E 3rd Street is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare E 3rd Street against other structures in Navajo and across Arizona. Arizona bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for E 3rd Street?
E 3rd Street in Navajo, Arizona on the FHWA's 0–9 scale.
How often is E 3rd Street inspected?
E 3rd Street's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 7,400 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. E 3rd Street is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for E 3rd Street?
E 3rd Street has an NBI inventory load rating of 31.8 metric tons.
Who is responsible for maintaining E 3rd Street?
E 3rd Street is owned and maintained by City/Municipal Highway Agency.
How old is E 3rd Street and does age affect safety?
E 3rd Street was built in 1953, making it 73 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.