SEARS BLVD
Carrying SEARS BLVD over HERSHEY RUN
S/E OF STANTON, New Castle, Delaware
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: SEARS BLVD
The SEARS BLVD bridge in New Castle, Delaware carries SEARS BLVD over HERSHEY RUN. It was built in 1995, making it 31 years old today. The structure is built primarily of aluminum/iron and spans 1 section, stretching 9.1 meters (30 feet) end to end. Daily traffic averages 785 vehicles, placing it in the lower-traffic tier of Delaware bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show culvert at 5/9. The weakest component sits in fair condition. All reported major components score above the Poor range. Its NBI inventory load rating is 41.5 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How SEARS BLVD compares
Live comparison across Delaware.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1995
- Material
- Aluminum/Iron
- Number of Spans
- 1
- Structure Length
- 9.1 m (30 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 785 vehicles/day
- Structure Number
- 1167 090A
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether SEARS BLVD is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare SEARS BLVD against other structures in New Castle and across Delaware. Delaware bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for SEARS BLVD?
SEARS BLVD in New Castle, Delaware on the FHWA's 0–9 scale.
How often is SEARS BLVD inspected?
SEARS BLVD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 785 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. SEARS BLVD is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for SEARS BLVD?
SEARS BLVD has an NBI inventory load rating of 41.5 metric tons.
Who is responsible for maintaining SEARS BLVD?
SEARS BLVD is owned and maintained by State Highway Agency.
How old is SEARS BLVD and does age affect safety?
SEARS BLVD was built in 1995, making it 31 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.