FHWA NBI 2024 Inspection record Public-domain dataset

BELLINGER SCALE RD

Carrying BELLINGER SCALE RD over HAMILTON CR

003 MI N CR 20B, Linn, Oregon

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Poor
30 t Inventory load rating

Bridge Snapshot: BELLINGER SCALE RD

The BELLINGER SCALE RD bridge in Linn, Oregon carries BELLINGER SCALE RD over HAMILTON CR. It was built in 1967, making it 59 years old today. The structure is built primarily of prestressed concrete and spans 3 sections, stretching 25.0 meters (82 feet) end to end. Daily traffic averages 1,390 vehicles, placing it in the moderately-trafficked tier of Oregon bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 7/9, superstructure at 7/9, substructure at 3/9. The weakest component sits in poor condition. A component scored 4 or below, placing this bridge in the federal Poor condition category rather than declaring it unsafe or closed. Its NBI inventory load rating is 30.1 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How BELLINGER SCALE RD compares

▼ 2.2
Load rating vs Oregon average (32.3 t)
Top 50%
Higher load rating than 50% of Oregon bridges
567
Bridges in Linn · 100 in Poor condition
BELLINGER SCALE RD 30.1 t
Oregon average 32.3 t

Live comparison across Oregon.

Historical Sufficiency Rating

PlainBridge-computed
48.5 / 100 - historical 20–49.9 band
Structural adequacy /55
13.9
Serviceability /30
26.0
Essentiality /15
11.7
Special reductions
−3.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
7/9
Good (7–9)
Superstructure
7/9
Good (7–9)
Substructure
3/9
Poor (1–4)
Inventory Load Rating
30.1 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1967
Material
Prestressed Concrete
Number of Spans
3
Structure Length
25.0 m (82 ft)
Deck Width
12.2 m (40 ft)
Owner
County Highway Agency
Avg Daily Traffic
1,390 vehicles/day
Structure Number
11974 072200027

Condition Analysis

  • The deck (driving surface) rates good at 7/9, with no significant deterioration on file.
  • At 7/9, the superstructure (beams and supports above the deck) is in good shape and shows no significant wear.
  • At 3/9, the substructure (piers and abutments) is in poor shape, with advanced wear flagged for priority repair.

How to read this record

BELLINGER SCALE RD is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare BELLINGER SCALE RD against other structures in Linn and across Oregon. Oregon bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for BELLINGER SCALE RD?

BELLINGER SCALE RD in Linn, Oregon has a deck rating of 7/9, superstructure rating of 7/9, and substructure rating of 3/9 on the FHWA's 0–9 scale.

How often is BELLINGER SCALE RD inspected?

BELLINGER SCALE RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 1,390 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. BELLINGER SCALE RD is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for BELLINGER SCALE RD?

BELLINGER SCALE RD has an NBI inventory load rating of 30.1 metric tons.

Who is responsible for maintaining BELLINGER SCALE RD?

BELLINGER SCALE RD is owned and maintained by County Highway Agency.

How old is BELLINGER SCALE RD and does age affect safety?

BELLINGER SCALE RD was built in 1967, making it 59 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.