FHWA NBI 2024 Inspection record Public-domain dataset

HANCOCK DRIVE

Carrying HANCOCK DRIVE over LP 1 SB

0.4 MI S OF RM 2222, Travis, Texas

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Unknown

Bridge Snapshot: HANCOCK DRIVE

The HANCOCK DRIVE bridge in Travis, Texas carries HANCOCK DRIVE over LP 1 SB. It was built in 1970, making it 56 years old today. The structure is built primarily of steel continuous. Average daily traffic is not reported for this structure.

The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. No reported major component scores in the Poor range under the current federal condition thresholds.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How HANCOCK DRIVE compares

1,544
Bridges in Travis · 2 in Poor condition

Live comparison across Texas.

Historical Sufficiency Rating

PlainBridge-computed
80.0 / 100 - historical 80–100 band
Structural adequacy /55
45.2
Serviceability /30
25.0
Essentiality /15
12.9
Special reductions
−3.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Overall Condition
Unrated

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1970
Material
Steel Continuous
Structure Number
142270313601022

How to read this record

This page shows what the last federal inspection recorded, not whether HANCOCK DRIVE is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare HANCOCK DRIVE against other structures in Travis and across Texas. Texas bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for HANCOCK DRIVE?

HANCOCK DRIVE in Travis, Texas on the FHWA's 0–9 scale.

How often is HANCOCK DRIVE inspected?

HANCOCK DRIVE's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. HANCOCK DRIVE is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for HANCOCK DRIVE?

An inventory load rating is not recorded for HANCOCK DRIVE.

Who is responsible for maintaining HANCOCK DRIVE?

Ownership is not specified for HANCOCK DRIVE in the NBI.

How old is HANCOCK DRIVE and does age affect safety?

HANCOCK DRIVE was built in 1970, making it 56 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.