CR 440
Carrying CR 440 over SAN ANDREAS CREEK
1.50 MI W OF CR 465, Jim Wells, Texas
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: CR 440
The CR 440 bridge in Jim Wells, Texas carries CR 440 over SAN ANDREAS CREEK. It was built in 1940, making it 86 years old today. The structure is built primarily of concrete and spans 6 sections, stretching 12.2 meters (40 feet) end to end. Daily traffic averages 55 vehicles, placing it in the lower-traffic tier of Texas bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show culvert at 4/9. The weakest component sits in poor condition. A component scored 4 or below, placing this bridge in the federal Poor condition category rather than declaring it unsafe or closed. Its NBI inventory load rating is 11.8 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How CR 440 compares
Live comparison across Texas.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1940
- Material
- Concrete
- Number of Spans
- 6
- Structure Length
- 12.2 m (40 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 55 vehicles/day
- Structure Number
- 161260AA0292002
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
CR 440 is in the federal Poor condition category. That is a component-based result, not a closure order.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
- Compare CR 440 against other structures in Jim Wells and across Texas. Texas bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for CR 440?
CR 440 in Jim Wells, Texas on the FHWA's 0–9 scale.
How often is CR 440 inspected?
CR 440's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 55 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. CR 440 is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for CR 440?
CR 440 has an NBI inventory load rating of 11.8 metric tons.
Who is responsible for maintaining CR 440?
CR 440 is owned and maintained by County Highway Agency.
How old is CR 440 and does age affect safety?
CR 440 was built in 1940, making it 86 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.