BS 36
Carrying BS 36 over HIGGINS BRANCH
0.37 MI N OF BUS 290, Washington, Texas
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: BS 36
The BS 36 bridge in Washington, Texas carries BS 36 over HIGGINS BRANCH. It was built in 1957, making it 69 years old today. The structure is built primarily of concrete and spans 2 sections, stretching 6.1 meters (20 feet) end to end. Daily traffic averages 6,509 vehicles, placing it in the moderately-trafficked tier of Texas bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show culvert at 6/9. The weakest component sits in fair condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 23.6 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How BS 36 compares
Live comparison across Texas.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1957
- Material
- Concrete
- Number of Spans
- 2
- Structure Length
- 6.1 m (20 ft)
- Deck Width
- 23.9 m (78 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 6,509 vehicles/day
- Structure Number
- 172390018605032
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether BS 36 is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare BS 36 against other structures in Washington and across Texas. Texas bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for BS 36?
BS 36 in Washington, Texas on the FHWA's 0–9 scale.
How often is BS 36 inspected?
BS 36's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 6,509 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. BS 36 is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for BS 36?
BS 36 has an NBI inventory load rating of 23.6 metric tons.
Who is responsible for maintaining BS 36?
BS 36 is owned and maintained by State Highway Agency.
How old is BS 36 and does age affect safety?
BS 36 was built in 1957, making it 69 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.