FHWA NBI 2024 Inspection record Public-domain dataset

Holford Rd

Carrying Holford Rd over Draw

200 ft N of W Campbell Rd, Dallas, Texas

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Good
33 t Inventory load rating

Bridge Snapshot: Holford Rd

The Holford Rd bridge in Dallas, Texas carries Holford Rd over Draw. It was built in 1992, making it 34 years old today. It was last reconstructed in 2003, extending its service life. The structure is built primarily of concrete and spans 2 sections, stretching 7.9 meters (26 feet) end to end. Daily traffic averages 400 vehicles, placing it in the lower-traffic tier of Texas bridges. It is owned and maintained by City/Municipal Highway Agency.

The latest FHWA inspection records show culvert at 7/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 32.7 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How Holford Rd compares

▲ 4.4
Load rating vs Texas average (28.3 t)
Top 40%
Higher load rating than 60% of Texas bridges
3,231
Bridges in Dallas · 18 in Poor condition
Holford Rd 32.7 t
Texas average 28.3 t

Live comparison across Texas.

Historical Sufficiency Rating

PlainBridge-computed
97.0 / 100 - historical 80–100 band
Structural adequacy /55
55.0
Serviceability /30
30.0
Essentiality /15
15.0
Special reductions
−3.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Culvert
7/9
Good (7–9)
Inventory Load Rating
32.7 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1992
Last Reconstructed
2003
Material
Concrete
Number of Spans
2
Structure Length
7.9 m (26 ft)
Deck Width
25.9 m (85 ft)
Owner
City/Municipal Highway Agency
Avg Daily Traffic
400 vehicles/day
Structure Number
180570LK0623001

How to read this record

This page shows what the last federal inspection recorded, not whether Holford Rd is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare Holford Rd against other structures in Dallas and across Texas. Texas bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for Holford Rd?

Holford Rd in Dallas, Texas on the FHWA's 0–9 scale.

How often is Holford Rd inspected?

Holford Rd's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 400 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. Holford Rd is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for Holford Rd?

Holford Rd has an NBI inventory load rating of 32.7 metric tons.

Who is responsible for maintaining Holford Rd?

Holford Rd is owned and maintained by City/Municipal Highway Agency.

How old is Holford Rd and does age affect safety?

Holford Rd was built in 1992, making it 34 years old and last reconstructed in 2003.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.