RUXTON ROAD
Carrying RUXTON ROAD over ROLAND RUN
0.42 MI E OF MD 134, Baltimore, Maryland
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: RUXTON ROAD
The RUXTON ROAD bridge in Baltimore, Maryland carries RUXTON ROAD over ROLAND RUN. It was built in 1959, making it 67 years old today. The structure is built primarily of concrete, stretching 22.9 meters (75 feet) end to end. Daily traffic averages 6,375 vehicles, placing it in the moderately-trafficked tier of Maryland bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show culvert at 6/9. The weakest component sits in fair condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 64.9 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How RUXTON ROAD compares
Live comparison across Maryland.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1959
- Material
- Concrete
- Structure Length
- 22.9 m (75 ft)
- Deck Width
- 11.7 m (38 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 6,375 vehicles/day
- Structure Number
- 200000B-0374020
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether RUXTON ROAD is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare RUXTON ROAD against other structures in Baltimore and across Maryland. Maryland bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for RUXTON ROAD?
RUXTON ROAD in Baltimore, Maryland on the FHWA's 0–9 scale.
How often is RUXTON ROAD inspected?
RUXTON ROAD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 6,375 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. RUXTON ROAD is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for RUXTON ROAD?
RUXTON ROAD has an NBI inventory load rating of 64.9 metric tons.
Who is responsible for maintaining RUXTON ROAD?
RUXTON ROAD is owned and maintained by County Highway Agency.
How old is RUXTON ROAD and does age affect safety?
RUXTON ROAD was built in 1959, making it 67 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.