FHWA NBI 2024 Inspection record Public-domain dataset

BELMONT WOODS ROAD

Carrying BELMONT WOODS ROAD over ROCKBURN BRANCH

0.1 MI W OF I-95, Howard, Maryland

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Poor
77 t Inventory load rating

Bridge Snapshot: BELMONT WOODS ROAD

The BELMONT WOODS ROAD bridge in Howard, Maryland carries BELMONT WOODS ROAD over ROCKBURN BRANCH. It was built in 1950, making it 76 years old today. The structure is built primarily of steel continuous and spans 2 sections, stretching 13.4 meters (44 feet) end to end. Daily traffic averages 100 vehicles, placing it in the lower-traffic tier of Maryland bridges. It is owned and maintained by Private.

The latest FHWA inspection records show a deck rating of 7/9, superstructure at 4/9, substructure at 6/9. The weakest component sits in poor condition. A component scored 4 or below, placing this bridge in the federal Poor condition category rather than declaring it unsafe or closed. Its NBI inventory load rating is 77.1 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How BELMONT WOODS ROAD compares

▲ 26.0
Load rating vs Maryland average (51.1 t)
Top 16%
Higher load rating than 84% of Maryland bridges
310
Bridges in Howard · 18 in Poor condition
BELMONT WOODS ROAD 77.1 t
Maryland average 51.1 t

Live comparison across Maryland.

Historical Sufficiency Rating

PlainBridge-computed
47.5 / 100 - historical 20–49.9 band
Structural adequacy /55
30.0
Serviceability /30
12.0
Essentiality /15
13.5
Special reductions
−8.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
7/9
Good (7–9)
Superstructure
4/9
Poor (1–4)
Substructure
6/9
Fair (5–6)
Inventory Load Rating
77.1 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1950
Material
Steel Continuous
Number of Spans
2
Structure Length
13.4 m (44 ft)
Deck Width
4.3 m (14 ft)
Owner
Private
Avg Daily Traffic
100 vehicles/day
Structure Number
200000HO0201060

Condition Analysis

  • The deck (driving surface) is in good condition (7/9), showing no significant deterioration.
  • The superstructure (beams and supports above the deck) rates poor at 4/9, advanced deterioration that should be prioritized for repair.
  • The substructure (piers and abutments) rates fair at 6/9, minor deterioration that routine maintenance should address.

How to read this record

BELMONT WOODS ROAD is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare BELMONT WOODS ROAD against other structures in Howard and across Maryland. Maryland bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for BELMONT WOODS ROAD?

BELMONT WOODS ROAD in Howard, Maryland has a deck rating of 7/9, superstructure rating of 4/9, and substructure rating of 6/9 on the FHWA's 0–9 scale.

How often is BELMONT WOODS ROAD inspected?

BELMONT WOODS ROAD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 100 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. BELMONT WOODS ROAD is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for BELMONT WOODS ROAD?

BELMONT WOODS ROAD has an NBI inventory load rating of 77.1 metric tons.

Who is responsible for maintaining BELMONT WOODS ROAD?

BELMONT WOODS ROAD is owned and maintained by Private.

How old is BELMONT WOODS ROAD and does age affect safety?

BELMONT WOODS ROAD was built in 1950, making it 76 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.