ELLICOTT WOODS LN
Carrying ELLICOTT WOODS LN over TRIB TO BONNIE BR
At Worthington Way, Howard, Maryland
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: ELLICOTT WOODS LN
The ELLICOTT WOODS LN bridge in Howard, Maryland carries ELLICOTT WOODS LN over TRIB TO BONNIE BR. It was built in 1990, making it 36 years old today. The structure is built primarily of concrete, stretching 6.4 meters (21 feet) end to end. Daily traffic averages 50 vehicles, placing it in the lower-traffic tier of Maryland bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show culvert at 7/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 32.7 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How ELLICOTT WOODS LN compares
Live comparison across Maryland.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1990
- Material
- Concrete
- Structure Length
- 6.4 m (21 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 50 vehicles/day
- Structure Number
- 200000HO0272030
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether ELLICOTT WOODS LN is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare ELLICOTT WOODS LN against other structures in Howard and across Maryland. Maryland bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for ELLICOTT WOODS LN?
ELLICOTT WOODS LN in Howard, Maryland on the FHWA's 0–9 scale.
How often is ELLICOTT WOODS LN inspected?
ELLICOTT WOODS LN's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 50 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. ELLICOTT WOODS LN is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for ELLICOTT WOODS LN?
ELLICOTT WOODS LN has an NBI inventory load rating of 32.7 metric tons.
Who is responsible for maintaining ELLICOTT WOODS LN?
ELLICOTT WOODS LN is owned and maintained by County Highway Agency.
How old is ELLICOTT WOODS LN and does age affect safety?
ELLICOTT WOODS LN was built in 1990, making it 36 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.