FHWA NBI 2024 Inspection record Public-domain dataset

SMYRNA-LEIPSIC RD

Carrying SMYRNA-LEIPSIC RD over SR 1

SOUTH SMYRNA, Kent, Delaware

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Unknown

Bridge Snapshot: SMYRNA-LEIPSIC RD

The SMYRNA-LEIPSIC RD bridge in Kent, Delaware carries SMYRNA-LEIPSIC RD over SR 1. It was built in 1991, making it 35 years old today. The structure is built primarily of steel continuous. Daily traffic averages 51,973 vehicles, placing it in the heavily-trafficked tier of Delaware bridges.

The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. None of this bridge's reported major components fall into the Poor condition range.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How SMYRNA-LEIPSIC RD compares

192
Bridges in Kent · 3 in Poor condition

Live comparison across Delaware.

Historical Sufficiency Rating

PlainBridge-computed
97.8 / 100 - historical 80–100 band
Structural adequacy /55
55.0
Serviceability /30
30.0
Essentiality /15
14.8
Special reductions
−2.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Overall Condition
Unrated

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1991
Material
Steel Continuous
Avg Daily Traffic
51,973 vehicles/day
Structure Number
2012C012

How to read this record

This page shows what the last federal inspection recorded, not whether SMYRNA-LEIPSIC RD is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare SMYRNA-LEIPSIC RD against other structures in Kent and across Delaware. Delaware bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for SMYRNA-LEIPSIC RD?

SMYRNA-LEIPSIC RD in Kent, Delaware on the FHWA's 0–9 scale.

How often is SMYRNA-LEIPSIC RD inspected?

SMYRNA-LEIPSIC RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 51,973 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. SMYRNA-LEIPSIC RD is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for SMYRNA-LEIPSIC RD?

An inventory load rating is not recorded for SMYRNA-LEIPSIC RD.

Who is responsible for maintaining SMYRNA-LEIPSIC RD?

Ownership is not specified for SMYRNA-LEIPSIC RD in the NBI.

How old is SMYRNA-LEIPSIC RD and does age affect safety?

SMYRNA-LEIPSIC RD was built in 1991, making it 35 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.