B470 CATLOW VALLEY
Carrying B470 CATLOW VALLEY over DRY CREEK
043 M ORE205 ROARING SPRG, Harney, Oregon
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: B470 CATLOW VALLEY
The B470 CATLOW VALLEY bridge in Harney, Oregon carries B470 CATLOW VALLEY over DRY CREEK. It was built in 2006, making it 20 years old today. The structure is built primarily of prestressed concrete and spans 1 section, stretching 21.0 meters (69 feet) end to end. Daily traffic averages 127 vehicles, placing it in the lower-traffic tier of Oregon bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show a deck rating of 8/9, superstructure at 7/9, substructure at 7/9. The weakest component sits in good condition. All reported major components score above the Poor range. Its NBI inventory load rating is 29.8 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How B470 CATLOW VALLEY compares
Live comparison across Oregon.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2006
- Material
- Prestressed Concrete
- Number of Spans
- 1
- Structure Length
- 21.0 m (69 ft)
- Deck Width
- 8.5 m (28 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 127 vehicles/day
- Structure Number
- 20453 C20200431
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗Condition Analysis
- • The deck (driving surface) is in good condition (8/9), showing no significant deterioration.
- • At 7/9, the superstructure (beams and supports above the deck) is in good shape and shows no significant wear.
- • The substructure (piers and abutments) is in good condition (7/9), showing no significant deterioration.
How to read this record
This page shows what the last federal inspection recorded, not whether B470 CATLOW VALLEY is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare B470 CATLOW VALLEY against other structures in Harney and across Oregon. Oregon bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for B470 CATLOW VALLEY?
B470 CATLOW VALLEY in Harney, Oregon has a deck rating of 8/9, superstructure rating of 7/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.
How often is B470 CATLOW VALLEY inspected?
B470 CATLOW VALLEY's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 127 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. B470 CATLOW VALLEY is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for B470 CATLOW VALLEY?
B470 CATLOW VALLEY has an NBI inventory load rating of 29.8 metric tons.
Who is responsible for maintaining B470 CATLOW VALLEY?
B470 CATLOW VALLEY is owned and maintained by County Highway Agency.
How old is B470 CATLOW VALLEY and does age affect safety?
B470 CATLOW VALLEY was built in 2006, making it 20 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.