FHWA NBI 2024 Inspection record Public-domain dataset

CONN VALLEY RD

Carrying CONN VALLEY RD over CONN CREEK

4.1 MI E SILVERADO TRAIL, Napa, California

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Fair
16 t Inventory load rating

Bridge Snapshot: CONN VALLEY RD

The CONN VALLEY RD bridge in Napa, California carries CONN VALLEY RD over CONN CREEK. It was built in 1920, making it 106 years old today. It was last reconstructed in 1946, extending its service life. The structure is built primarily of concrete and spans 1 section, stretching 11.3 meters (37 feet) end to end. Daily traffic averages 740 vehicles, placing it in the lower-traffic tier of California bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 7/9, superstructure at 7/9, substructure at 5/9. The weakest component sits in fair condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 15.6 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How CONN VALLEY RD compares

▼ 15.7
Load rating vs California average (31.3 t)
Bottom 3%
Lower load rating than 97% of California bridges
160
Bridges in Napa · 7 in Poor condition
CONN VALLEY RD 15.6 t
California average 31.3 t

Live comparison across California.

Historical Sufficiency Rating

PlainBridge-computed
31.6 / 100 - historical 20–49.9 band
Structural adequacy /55
22.6
Serviceability /30
9.0
Essentiality /15
0.0
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
7/9
Good (7–9)
Superstructure
7/9
Good (7–9)
Substructure
5/9
Fair (5–6)
Inventory Load Rating
15.6 t
NBI inventory level (metric tons)
Overall Condition
Fair

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1920
Last Reconstructed
1946
Material
Concrete
Number of Spans
1
Structure Length
11.3 m (37 ft)
Deck Width
6.1 m (20 ft)
Owner
County Highway Agency
Avg Daily Traffic
740 vehicles/day
Structure Number
21C0077

Condition Analysis

  • At 7/9, the deck (driving surface) is in good shape and shows no significant wear.
  • At 7/9, the superstructure (beams and supports above the deck) is in good shape and shows no significant wear.
  • The substructure (piers and abutments) is in fair condition (5/9), with minor deterioration that may require routine maintenance.

How to read this record

This page shows what the last federal inspection recorded, not whether CONN VALLEY RD is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare CONN VALLEY RD against other structures in Napa and across California. California bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for CONN VALLEY RD?

CONN VALLEY RD in Napa, California has a deck rating of 7/9, superstructure rating of 7/9, and substructure rating of 5/9 on the FHWA's 0–9 scale.

How often is CONN VALLEY RD inspected?

CONN VALLEY RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 740 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. CONN VALLEY RD is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for CONN VALLEY RD?

CONN VALLEY RD has an NBI inventory load rating of 15.6 metric tons.

Who is responsible for maintaining CONN VALLEY RD?

CONN VALLEY RD is owned and maintained by County Highway Agency.

How old is CONN VALLEY RD and does age affect safety?

CONN VALLEY RD was built in 1920, making it 106 years old and last reconstructed in 1946.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.