Jack London Rd
Carrying Jack London Rd over Stewart Slough
0.1 mi S/O Walnut st., Benton, Oregon
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: Jack London Rd
The Jack London Rd bridge in Benton, Oregon carries Jack London Rd over Stewart Slough. It was built in 2013, making it 13 years old today. The structure is built primarily of concrete continuous and spans 2 sections, stretching 7.3 meters (24 feet) end to end. Daily traffic averages 343 vehicles, placing it in the lower-traffic tier of Oregon bridges. It is owned and maintained by City/Municipal Highway Agency.
The latest FHWA inspection records show culvert at 6/9. The weakest component sits in fair condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 20.4 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How Jack London Rd compares
Live comparison across Oregon.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2013
- Material
- Concrete Continuous
- Number of Spans
- 2
- Structure Length
- 7.3 m (24 ft)
- Deck Width
- 13.7 m (45 ft)
- Owner
- City/Municipal Highway Agency
- Avg Daily Traffic
- 343 vehicles/day
- Structure Number
- 22143 000 00000
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether Jack London Rd is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare Jack London Rd against other structures in Benton and across Oregon. Oregon bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for Jack London Rd?
Jack London Rd in Benton, Oregon on the FHWA's 0–9 scale.
How often is Jack London Rd inspected?
Jack London Rd's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 343 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. Jack London Rd is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for Jack London Rd?
Jack London Rd has an NBI inventory load rating of 20.4 metric tons.
Who is responsible for maintaining Jack London Rd?
Jack London Rd is owned and maintained by City/Municipal Highway Agency.
How old is Jack London Rd and does age affect safety?
Jack London Rd was built in 2013, making it 13 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.