SE Washington St
Carrying SE Washington St over Kellogg Creek
East bound off of Hwy 081, Clackamas, Oregon
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: SE Washington St
The SE Washington St bridge in Clackamas, Oregon carries SE Washington St over Kellogg Creek. It was built in 2018, making it 8 years old today. The structure is built primarily of prestressed concrete and spans 1 section, stretching 35.1 meters (115 feet) end to end. Daily traffic averages 90 vehicles, placing it in the lower-traffic tier of Oregon bridges. It is owned and maintained by City/Municipal Highway Agency.
The latest FHWA inspection records show a deck rating of 8/9, superstructure at 8/9, substructure at 8/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 55.1 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How SE Washington St compares
Live comparison across Oregon.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2018
- Material
- Prestressed Concrete
- Number of Spans
- 1
- Structure Length
- 35.1 m (115 ft)
- Deck Width
- 10.7 m (35 ft)
- Owner
- City/Municipal Highway Agency
- Avg Daily Traffic
- 90 vehicles/day
- Structure Number
- 22877 000 00000
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗Condition Analysis
- • The deck (driving surface) is in good condition (8/9), showing no significant deterioration.
- • At 8/9, the superstructure (beams and supports above the deck) is in good shape and shows no significant wear.
- • At 8/9, the substructure (piers and abutments) is in good shape and shows no significant wear.
How to read this record
This page shows what the last federal inspection recorded, not whether SE Washington St is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare SE Washington St against other structures in Clackamas and across Oregon. Oregon bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for SE Washington St?
SE Washington St in Clackamas, Oregon has a deck rating of 8/9, superstructure rating of 8/9, and substructure rating of 8/9 on the FHWA's 0–9 scale.
How often is SE Washington St inspected?
SE Washington St's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 90 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. SE Washington St is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for SE Washington St?
SE Washington St has an NBI inventory load rating of 55.1 metric tons.
Who is responsible for maintaining SE Washington St?
SE Washington St is owned and maintained by City/Municipal Highway Agency.
How old is SE Washington St and does age affect safety?
SE Washington St was built in 2018, making it 8 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.