SAN JUAN RD
Carrying SAN JUAN RD over EAST DRAINAGE CANAL
0.1 MI E AIRPORT RD, Sacramento, California
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: SAN JUAN RD
The SAN JUAN RD bridge in Sacramento, California carries SAN JUAN RD over EAST DRAINAGE CANAL. It was built in 1965, making it 61 years old today. The structure is built primarily of concrete continuous and spans 3 sections, stretching 13.5 meters (44 feet) end to end. Daily traffic averages 2,773 vehicles, placing it in the moderately-trafficked tier of California bridges. It is owned and maintained by City/Municipal Highway Agency.
The latest FHWA inspection records show culvert at 7/9. The weakest component sits in good condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 24.3 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How SAN JUAN RD compares
Live comparison across California.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1965
- Material
- Concrete Continuous
- Number of Spans
- 3
- Structure Length
- 13.5 m (44 ft)
- Owner
- City/Municipal Highway Agency
- Avg Daily Traffic
- 2,773 vehicles/day
- Structure Number
- 24C0132
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether SAN JUAN RD is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare SAN JUAN RD against other structures in Sacramento and across California. California bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for SAN JUAN RD?
SAN JUAN RD in Sacramento, California on the FHWA's 0–9 scale.
How often is SAN JUAN RD inspected?
SAN JUAN RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 2,773 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. SAN JUAN RD is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for SAN JUAN RD?
SAN JUAN RD has an NBI inventory load rating of 24.3 metric tons.
Who is responsible for maintaining SAN JUAN RD?
SAN JUAN RD is owned and maintained by City/Municipal Highway Agency.
How old is SAN JUAN RD and does age affect safety?
SAN JUAN RD was built in 1965, making it 61 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.