HIGHT ST -N880
Carrying HIGHT ST -N880 over SR 77 & S880-N77 CNNCTR
04-ALA-880-27.70-OAK, Alameda, California
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: HIGHT ST -N880
The HIGHT ST -N880 bridge in Alameda, California carries HIGHT ST -N880 over SR 77 & S880-N77 CNNCTR. It was built in 2013, making it 13 years old today. The structure is built primarily of concrete continuous. Daily traffic averages 24,500 vehicles, placing it in the heavily-trafficked tier of California bridges.
The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. No reported major component scores in the Poor range under the current federal condition thresholds.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How HIGHT ST -N880 compares
Live comparison across California.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2013
- Material
- Concrete Continuous
- Avg Daily Traffic
- 24,500 vehicles/day
- Structure Number
- 33 0681S
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether HIGHT ST -N880 is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare HIGHT ST -N880 against other structures in Alameda and across California. California bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for HIGHT ST -N880?
HIGHT ST -N880 in Alameda, California on the FHWA's 0–9 scale.
How often is HIGHT ST -N880 inspected?
HIGHT ST -N880's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 24,500 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. HIGHT ST -N880 is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for HIGHT ST -N880?
An inventory load rating is not recorded for HIGHT ST -N880.
Who is responsible for maintaining HIGHT ST -N880?
Ownership is not specified for HIGHT ST -N880 in the NBI.
How old is HIGHT ST -N880 and does age affect safety?
HIGHT ST -N880 was built in 2013, making it 13 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.