RP.I80WB TO I215SB
Carrying RP.I80WB TO I215SB over I-80 EBL & WBL & RAMP
I215-I80 INTCHG.W OF SLC., Salt Lake, Utah
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: RP.I80WB TO I215SB
The RP.I80WB TO I215SB bridge in Salt Lake, Utah carries RP.I80WB TO I215SB over I-80 EBL & WBL & RAMP. It was built in 1986, making it 40 years old today. The structure is built primarily of steel continuous. Daily traffic averages 61,595 vehicles, placing it in the heavily-trafficked tier of Utah bridges.
The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. All reported major components score above the Poor range.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How RP.I80WB TO I215SB compares
Live comparison across Utah.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1986
- Material
- Steel Continuous
- Avg Daily Traffic
- 61,595 vehicles/day
- Structure Number
- 3C 739
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether RP.I80WB TO I215SB is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare RP.I80WB TO I215SB against other structures in Salt Lake and across Utah. Utah bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for RP.I80WB TO I215SB?
RP.I80WB TO I215SB in Salt Lake, Utah on the FHWA's 0–9 scale.
How often is RP.I80WB TO I215SB inspected?
RP.I80WB TO I215SB's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 61,595 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. RP.I80WB TO I215SB is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for RP.I80WB TO I215SB?
An inventory load rating is not recorded for RP.I80WB TO I215SB.
Who is responsible for maintaining RP.I80WB TO I215SB?
Ownership is not specified for RP.I80WB TO I215SB in the NBI.
How old is RP.I80WB TO I215SB and does age affect safety?
RP.I80WB TO I215SB was built in 1986, making it 40 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.