ENSLEY LANE
Carrying ENSLEY LANE over TRIB. TO DYKES BRANCH
450ft N of 88th ST, Johnson, Kansas
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: ENSLEY LANE
The ENSLEY LANE bridge in Johnson, Kansas carries ENSLEY LANE over TRIB. TO DYKES BRANCH. It was built in 2016, making it 10 years old today. The structure is built primarily of concrete and spans 2 sections, stretching 11.6 meters (38 feet) end to end. Daily traffic averages 400 vehicles, placing it in the lower-traffic tier of Kansas bridges. It is owned and maintained by City/Municipal Highway Agency.
The latest FHWA inspection records show culvert at 8/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 60.9 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How ENSLEY LANE compares
Live comparison across Kansas.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2016
- Material
- Concrete
- Number of Spans
- 2
- Structure Length
- 11.6 m (38 ft)
- Owner
- City/Municipal Highway Agency
- Avg Daily Traffic
- 400 vehicles/day
- Structure Number
- 515450460000031
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether ENSLEY LANE is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare ENSLEY LANE against other structures in Johnson and across Kansas. Kansas bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for ENSLEY LANE?
ENSLEY LANE in Johnson, Kansas on the FHWA's 0–9 scale.
How often is ENSLEY LANE inspected?
ENSLEY LANE's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 400 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. ENSLEY LANE is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for ENSLEY LANE?
ENSLEY LANE has an NBI inventory load rating of 60.9 metric tons.
Who is responsible for maintaining ENSLEY LANE?
ENSLEY LANE is owned and maintained by City/Municipal Highway Agency.
How old is ENSLEY LANE and does age affect safety?
ENSLEY LANE was built in 2016, making it 10 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.