FHWA NBI 2024 Inspection record Public-domain dataset

BURBANK BLVD

Carrying BURBANK BLVD over CALABASAS CREEK

0.45 M W/O FALLBROOK AVE, Los Angeles, California

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Good
24 t Inventory load rating

Bridge Snapshot: BURBANK BLVD

The BURBANK BLVD bridge in Los Angeles, California carries BURBANK BLVD over CALABASAS CREEK. It was built in 1968, making it 58 years old today. The structure is built primarily of concrete and spans 1 section, stretching 14.0 meters (46 feet) end to end. Daily traffic averages 11,000 vehicles, placing it in the heavily-trafficked tier of California bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show culvert at 7/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 24.3 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How BURBANK BLVD compares

▼ 7.0
Load rating vs California average (31.3 t)
Bottom 19%
Lower load rating than 81% of California bridges
3,937
Bridges in Los Angeles · 88 in Poor condition
BURBANK BLVD 24.3 t
California average 31.3 t

Live comparison across California.

Historical Sufficiency Rating

PlainBridge-computed
88.4 / 100 - historical 80–100 band
Structural adequacy /55
47.5
Serviceability /30
30.0
Essentiality /15
13.9
Special reductions
−3.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Culvert
7/9
Good (7–9)
Inventory Load Rating
24.3 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1968
Material
Concrete
Number of Spans
1
Structure Length
14.0 m (46 ft)
Deck Width
56.5 m (185 ft)
Owner
County Highway Agency
Avg Daily Traffic
11,000 vehicles/day
Structure Number
53C1108

How to read this record

This page shows what the last federal inspection recorded, not whether BURBANK BLVD is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare BURBANK BLVD against other structures in Los Angeles and across California. California bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for BURBANK BLVD?

BURBANK BLVD in Los Angeles, California on the FHWA's 0–9 scale.

How often is BURBANK BLVD inspected?

BURBANK BLVD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 11,000 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. BURBANK BLVD is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for BURBANK BLVD?

BURBANK BLVD has an NBI inventory load rating of 24.3 metric tons.

Who is responsible for maintaining BURBANK BLVD?

BURBANK BLVD is owned and maintained by County Highway Agency.

How old is BURBANK BLVD and does age affect safety?

BURBANK BLVD was built in 1968, making it 58 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.