FHWA NBI 2024 Inspection record Public-domain dataset

BROOKSIDE AVE

Carrying BROOKSIDE AVE over MOREY ARROYO 2

0.31 MI NE TENNESSEE ST, San Bernardino, California

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Poor
18 t Inventory load rating

Bridge Snapshot: BROOKSIDE AVE

The BROOKSIDE AVE bridge in San Bernardino, California carries BROOKSIDE AVE over MOREY ARROYO 2. It was built in 1950, making it 76 years old today. The structure is built primarily of concrete and spans 1 section, stretching 21.0 meters (69 feet) end to end. Daily traffic averages 20,000 vehicles, placing it in the heavily-trafficked tier of California bridges. It is owned and maintained by City/Municipal Highway Agency.

The latest FHWA inspection records show superstructure at 4/9, substructure at 7/9. The weakest component sits in poor condition. A component scored 4 or below, placing this bridge in the federal Poor condition category rather than declaring it unsafe or closed. Its NBI inventory load rating is 17.5 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How BROOKSIDE AVE compares

▼ 13.8
Load rating vs California average (31.3 t)
Bottom 9%
Lower load rating than 91% of California bridges
1,465
Bridges in San Bernardino · 80 in Poor condition
BROOKSIDE AVE 17.5 t
California average 31.3 t

Live comparison across California.

Historical Sufficiency Rating

PlainBridge-computed
50.2 / 100 - historical 50–79.9 band
Structural adequacy /55
11.3
Serviceability /30
28.0
Essentiality /15
10.9
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Superstructure
4/9
Poor (1–4)
Substructure
7/9
Good (7–9)
Inventory Load Rating
17.5 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1950
Material
Concrete
Number of Spans
1
Structure Length
21.0 m (69 ft)
Deck Width
30.9 m (101 ft)
Owner
City/Municipal Highway Agency
Avg Daily Traffic
20,000 vehicles/day
Structure Number
54C0188

Condition Analysis

  • The superstructure (beams and supports above the deck) rates poor at 4/9, advanced deterioration that should be prioritized for repair.
  • The substructure (piers and abutments) rates good at 7/9, with no significant deterioration on file.

How to read this record

BROOKSIDE AVE is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare BROOKSIDE AVE against other structures in San Bernardino and across California. California bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for BROOKSIDE AVE?

BROOKSIDE AVE in San Bernardino, California, superstructure rating of 4/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.

How often is BROOKSIDE AVE inspected?

BROOKSIDE AVE's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 20,000 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. BROOKSIDE AVE is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for BROOKSIDE AVE?

BROOKSIDE AVE has an NBI inventory load rating of 17.5 metric tons.

Who is responsible for maintaining BROOKSIDE AVE?

BROOKSIDE AVE is owned and maintained by City/Municipal Highway Agency.

How old is BROOKSIDE AVE and does age affect safety?

BROOKSIDE AVE was built in 1950, making it 76 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.