E60-E10 CONNECTOR
Carrying E60-E10 CONNECTOR over EB 10-6TH ST OFF RAMP
08-RIV-060-30.44-BAU, Riverside, California
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: E60-E10 CONNECTOR
The E60-E10 CONNECTOR bridge in Riverside, California carries E60-E10 CONNECTOR over EB 10-6TH ST OFF RAMP. It was built in 2011, making it 15 years old today. The structure is built primarily of concrete. Daily traffic averages 4,650 vehicles, placing it in the moderately-trafficked tier of California bridges.
The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. All reported major components score above the Poor range.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How E60-E10 CONNECTOR compares
Live comparison across California.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2011
- Material
- Concrete
- Avg Daily Traffic
- 4,650 vehicles/day
- Structure Number
- 56 0834G
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether E60-E10 CONNECTOR is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare E60-E10 CONNECTOR against other structures in Riverside and across California. California bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for E60-E10 CONNECTOR?
E60-E10 CONNECTOR in Riverside, California on the FHWA's 0–9 scale.
How often is E60-E10 CONNECTOR inspected?
E60-E10 CONNECTOR's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 4,650 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. E60-E10 CONNECTOR is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for E60-E10 CONNECTOR?
An inventory load rating is not recorded for E60-E10 CONNECTOR.
Who is responsible for maintaining E60-E10 CONNECTOR?
Ownership is not specified for E60-E10 CONNECTOR in the NBI.
How old is E60-E10 CONNECTOR and does age affect safety?
E60-E10 CONNECTOR was built in 2011, making it 15 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.