FHWA NBI 2024 Inspection record Public-domain dataset

DILLON ROAD

Carrying DILLON ROAD over WHITEWATER RIVER

0.12 MI. SE/O SR 86S, Riverside, California

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Poor
8 t Inventory load rating

Bridge Snapshot: DILLON ROAD

The DILLON ROAD bridge in Riverside, California carries DILLON ROAD over WHITEWATER RIVER. It was built in 1950, making it 76 years old today. It was last reconstructed in 1969, extending its service life. The structure is built primarily of prestressed concrete and spans 1 section, stretching 85.0 meters (279 feet) end to end. Daily traffic averages 8,700 vehicles, placing it in the moderately-trafficked tier of California bridges. It is owned and maintained by City/Municipal Highway Agency.

The latest FHWA inspection records show a deck rating of 7/9, superstructure at 7/9, substructure at 4/9. The weakest component sits in poor condition. Because at least one major component scores 4 or lower, this bridge falls in FHWA's Poor condition category. That category is not a closure order. Its NBI inventory load rating is 8.1 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How DILLON ROAD compares

▼ 23.2
Load rating vs California average (31.3 t)
Bottom 1%
Lower load rating than 99% of California bridges
1,142
Bridges in Riverside · 27 in Poor condition
DILLON ROAD 8.1 t
California average 31.3 t

Live comparison across California.

Historical Sufficiency Rating

PlainBridge-computed
16.6 / 100 - historical under-20 band
Structural adequacy /55
0.0
Serviceability /30
14.0
Essentiality /15
2.6
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
7/9
Good (7–9)
Superstructure
7/9
Good (7–9)
Substructure
4/9
Poor (1–4)
Inventory Load Rating
8.1 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1950
Last Reconstructed
1969
Material
Prestressed Concrete
Number of Spans
1
Structure Length
85.0 m (279 ft)
Deck Width
10.4 m (34 ft)
Owner
City/Municipal Highway Agency
Avg Daily Traffic
8,700 vehicles/day
Structure Number
56C0318

Condition Analysis

  • The deck (driving surface) is in good condition (7/9), showing no significant deterioration.
  • The superstructure (beams and supports above the deck) is in good condition (7/9), showing no significant deterioration.
  • The substructure (piers and abutments) rates poor at 4/9, advanced deterioration that should be prioritized for repair.

How to read this record

DILLON ROAD is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare DILLON ROAD against other structures in Riverside and across California. California bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for DILLON ROAD?

DILLON ROAD in Riverside, California has a deck rating of 7/9, superstructure rating of 7/9, and substructure rating of 4/9 on the FHWA's 0–9 scale.

How often is DILLON ROAD inspected?

DILLON ROAD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 8,700 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. DILLON ROAD is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for DILLON ROAD?

DILLON ROAD has an NBI inventory load rating of 8.1 metric tons.

Who is responsible for maintaining DILLON ROAD?

DILLON ROAD is owned and maintained by City/Municipal Highway Agency.

How old is DILLON ROAD and does age affect safety?

DILLON ROAD was built in 1950, making it 76 years old and last reconstructed in 1969.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.