FHWA NBI 2024 Inspection record Public-domain dataset

CSAH 22

Carrying CSAH 22 over US 61

2.5 MI SE OF JCT TH 494, Washington, Minnesota

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Unknown

Bridge Snapshot: CSAH 22

The CSAH 22 bridge in Washington, Minnesota carries CSAH 22 over US 61. It was built in 2005, making it 21 years old today. The structure is built primarily of prestressed concrete. Daily traffic averages 65,000 vehicles, placing it in the heavily-trafficked tier of Minnesota bridges.

The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. None of this bridge's reported major components fall into the Poor condition range.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How CSAH 22 compares

112
Bridges in Washington · 4 in Poor condition

Live comparison across Minnesota.

Historical Sufficiency Rating

PlainBridge-computed
99.1 / 100 - historical 80–100 band
Structural adequacy /55
55.0
Serviceability /30
30.0
Essentiality /15
14.1
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Overall Condition
Unrated

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
2005
Material
Prestressed Concrete
Avg Daily Traffic
65,000 vehicles/day
Structure Number
82025

How to read this record

This page shows what the last federal inspection recorded, not whether CSAH 22 is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare CSAH 22 against other structures in Washington and across Minnesota. Minnesota bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for CSAH 22?

CSAH 22 in Washington, Minnesota on the FHWA's 0–9 scale.

How often is CSAH 22 inspected?

CSAH 22's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 65,000 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. CSAH 22 is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for CSAH 22?

An inventory load rating is not recorded for CSAH 22.

Who is responsible for maintaining CSAH 22?

Ownership is not specified for CSAH 22 in the NBI.

How old is CSAH 22 and does age affect safety?

CSAH 22 was built in 2005, making it 21 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.