FHWA NBI 2024 Inspection record Public-domain dataset

BUTLER WARREN ROAD

Carrying BUTLER WARREN ROAD over MILLERS CREEK

0.06 mi N of TR 68, Warren, Ohio

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Good
58 t Inventory load rating

Bridge Snapshot: BUTLER WARREN ROAD

The BUTLER WARREN ROAD bridge in Warren, Ohio carries BUTLER WARREN ROAD over MILLERS CREEK. It was built in 2014, making it 12 years old today. The structure is built primarily of concrete and spans 1 section, stretching 13.8 meters (45 feet) end to end. Daily traffic averages 4,592 vehicles, placing it in the moderately-trafficked tier of Ohio bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 8/9, superstructure at 8/9, substructure at 8/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 58.3 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How BUTLER WARREN ROAD compares

▲ 20.8
Load rating vs Ohio average (37.5 t)
Top 8%
Higher load rating than 92% of Ohio bridges
336
Bridges in Warren · 18 in Poor condition
BUTLER WARREN ROAD 58.3 t
Ohio average 37.5 t

Live comparison across Ohio.

Historical Sufficiency Rating

PlainBridge-computed
75.8 / 100 - historical 50–79.9 band
Structural adequacy /55
55.0
Serviceability /30
11.0
Essentiality /15
12.8
Special reductions
−3.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
8/9
Good (7–9)
Superstructure
8/9
Good (7–9)
Substructure
8/9
Good (7–9)
Inventory Load Rating
58.3 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
2014
Material
Concrete
Number of Spans
1
Structure Length
13.8 m (45 ft)
Deck Width
34.1 m (112 ft)
Owner
County Highway Agency
Avg Daily Traffic
4,592 vehicles/day
Structure Number
8330001

Condition Analysis

  • At 8/9, the deck (driving surface) is in good shape and shows no significant wear.
  • The superstructure (beams and supports above the deck) is in good condition (8/9), showing no significant deterioration.
  • The substructure (piers and abutments) is in good condition (8/9), showing no significant deterioration.

How to read this record

This page shows what the last federal inspection recorded, not whether BUTLER WARREN ROAD is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare BUTLER WARREN ROAD against other structures in Warren and across Ohio. Ohio bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for BUTLER WARREN ROAD?

BUTLER WARREN ROAD in Warren, Ohio has a deck rating of 8/9, superstructure rating of 8/9, and substructure rating of 8/9 on the FHWA's 0–9 scale.

How often is BUTLER WARREN ROAD inspected?

BUTLER WARREN ROAD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 4,592 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. BUTLER WARREN ROAD is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for BUTLER WARREN ROAD?

BUTLER WARREN ROAD has an NBI inventory load rating of 58.3 metric tons.

Who is responsible for maintaining BUTLER WARREN ROAD?

BUTLER WARREN ROAD is owned and maintained by County Highway Agency.

How old is BUTLER WARREN ROAD and does age affect safety?

BUTLER WARREN ROAD was built in 2014, making it 12 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.