FHWA NBI 2024 Inspection record Public-domain dataset

STH 36-LOOMIS RD

Carrying STH 36-LOOMIS RD over ROOT RIVER

3.3 MI N JCT STH 100, Milwaukee, Wisconsin

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Fair
29 t Inventory load rating

Bridge Snapshot: STH 36-LOOMIS RD

The STH 36-LOOMIS RD bridge in Milwaukee, Wisconsin carries STH 36-LOOMIS RD over ROOT RIVER. It was built in 1968, making it 58 years old today. The structure is built primarily of concrete continuous and spans 3 sections, stretching 40.8 meters (134 feet) end to end. Daily traffic averages 15,500 vehicles, placing it in the heavily-trafficked tier of Wisconsin bridges. It is owned and maintained by State Highway Agency.

The latest FHWA inspection records show a deck rating of 5/9, superstructure at 5/9, substructure at 5/9. The weakest component sits in fair condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 29.2 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How STH 36-LOOMIS RD compares

▼ 4.1
Load rating vs Wisconsin average (33.3 t)
Bottom 25%
Lower load rating than 75% of Wisconsin bridges
1,005
Bridges in Milwaukee · 32 in Poor condition
STH 36-LOOMIS RD 29.2 t
Wisconsin average 33.3 t

Live comparison across Wisconsin.

Historical Sufficiency Rating

PlainBridge-computed
79.2 / 100 - historical 50–79.9 band
Structural adequacy /55
43.1
Serviceability /30
28.0
Essentiality /15
8.1
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
5/9
Fair (5–6)
Superstructure
5/9
Fair (5–6)
Substructure
5/9
Fair (5–6)
Inventory Load Rating
29.2 t
NBI inventory level (metric tons)
Overall Condition
Fair

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1968
Material
Concrete Continuous
Number of Spans
3
Structure Length
40.8 m (134 ft)
Deck Width
39.6 m (130 ft)
Owner
State Highway Agency
Avg Daily Traffic
15,500 vehicles/day
Structure Number
B40038700000000

Condition Analysis

  • At 5/9, the deck (driving surface) shows fair condition, with minor wear flagged for upkeep.
  • The superstructure (beams and supports above the deck) rates fair at 5/9, minor deterioration that routine maintenance should address.
  • The substructure (piers and abutments) rates fair at 5/9, minor deterioration that routine maintenance should address.

How to read this record

This page shows what the last federal inspection recorded, not whether STH 36-LOOMIS RD is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare STH 36-LOOMIS RD against other structures in Milwaukee and across Wisconsin. Wisconsin bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for STH 36-LOOMIS RD?

STH 36-LOOMIS RD in Milwaukee, Wisconsin has a deck rating of 5/9, superstructure rating of 5/9, and substructure rating of 5/9 on the FHWA's 0–9 scale.

How often is STH 36-LOOMIS RD inspected?

STH 36-LOOMIS RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 15,500 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. STH 36-LOOMIS RD is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for STH 36-LOOMIS RD?

STH 36-LOOMIS RD has an NBI inventory load rating of 29.2 metric tons.

Who is responsible for maintaining STH 36-LOOMIS RD?

STH 36-LOOMIS RD is owned and maintained by State Highway Agency.

How old is STH 36-LOOMIS RD and does age affect safety?

STH 36-LOOMIS RD was built in 1968, making it 58 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.