FHWA NBI 2024 Inspection record Public-domain dataset

USH 10 WB

Carrying USH 10 WB over CTH F

1.0M S JCT CTH X, Waupaca, Wisconsin

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Unknown

Bridge Snapshot: USH 10 WB

The USH 10 WB bridge in Waupaca, Wisconsin carries USH 10 WB over CTH F. It was built in 1999, making it 27 years old today. The structure is built primarily of prestressed concrete. Daily traffic averages 1,300 vehicles, placing it in the moderately-trafficked tier of Wisconsin bridges.

The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. All reported major components score above the Poor range.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How USH 10 WB compares

172
Bridges in Waupaca · 4 in Poor condition

Live comparison across Wisconsin.

Historical Sufficiency Rating

PlainBridge-computed
97.0 / 100 - historical 80–100 band
Structural adequacy /55
55.0
Serviceability /30
29.0
Essentiality /15
13.0
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Overall Condition
Unrated

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1999
Material
Prestressed Concrete
Avg Daily Traffic
1,300 vehicles/day
Structure Number
B68010500000000

How to read this record

This page shows what the last federal inspection recorded, not whether USH 10 WB is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare USH 10 WB against other structures in Waupaca and across Wisconsin. Wisconsin bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for USH 10 WB?

USH 10 WB in Waupaca, Wisconsin on the FHWA's 0–9 scale.

How often is USH 10 WB inspected?

USH 10 WB's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 1,300 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. USH 10 WB is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for USH 10 WB?

An inventory load rating is not recorded for USH 10 WB.

Who is responsible for maintaining USH 10 WB?

Ownership is not specified for USH 10 WB in the NBI.

How old is USH 10 WB and does age affect safety?

USH 10 WB was built in 1999, making it 27 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.