FHWA NBI 2024 Inspection record Public-domain dataset

MILLSBORO HWY/SR26

Carrying MILLSBORO HWY/SR26 over GUM BRANCH

GUMBORO, Sussex, Delaware

Inventory: FHWA NBI 2024 · last ETL August 2026

FHWA NBI record, refreshed with each annual release.

Fair
52 t Inventory load rating Higher than 86% of rated Delaware bridges

MILLSBORO HWY/SR26 in Sussex, Delaware sits above 86% of rated Delaware bridges on inventory load rating (52 t), while its 2013 build year is earlier than 9% of Sussex's recorded-year cohort (153 bridges).

MILLSBORO HWY/SR26 in Sussex, Delaware is rated Fair in the FHWA's 2024 National Bridge Inventory. Built in 2013, it carries 1 rated component on the inspecting agency's 0-9 scale, and its weakest reported component scores 6. The lowest applicable rating sets the federal condition category, so this Fair result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.

NBI record plate

Structure DE:3583 026

POST-2000 · CONCRETE · SINGLE-SPAN · CULVERT-LED · ARTERIAL-ADT · HEAVY-LOAD · CAT-FAIR

  • POST-2000 2000+
  • CONCRETE Concrete
  • SINGLE-SPAN Single span
  • CULVERT-LED Culvert-led
  • ARTERIAL-ADT Arterial ADT
  • HEAVY-LOAD Heavy load
  • CAT-FAIR Fair

Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.

Bridge Snapshot: MILLSBORO HWY/SR26

The MILLSBORO HWY/SR26 bridge in Sussex, Delaware carries MILLSBORO HWY/SR26 over GUM BRANCH. It was built in 2013, making it 13 years old today. The structure is built primarily of concrete and spans 1 section, stretching 9.0 meters (30 feet) end to end. Daily traffic averages 5,657 vehicles, placing it in the moderately-trafficked tier of Delaware bridges. It is owned and maintained by State Highway Agency.

The latest FHWA inspection records show culvert at 6/9. The weakest component sits in fair condition. None of this bridge's reported major components fall into the Poor condition range.

How MILLSBORO HWY/SR26 compares

▲ 12.2
Load rating vs Delaware average (39.3 t; 872 rated)
153
Bridges in Sussex · 3 in Poor condition

Age against the county: built in 2013, earlier than 14 of Sussex's 153 bridges with a recorded construction year (9%), against a county median build year of 1973. This is one of the newer structures in its county.

MILLSBORO HWY/SR26 51.5 t
Delaware average (872 rated) 39.3 t

Live comparison across Delaware bridges with a recorded inventory load rating (872 rated).

MILLSBORO HWY/SR26 vs every rated Delaware bridge

Inventory load rating (metric tons), FHWA NBI, this state

52 Top 14% higher than 86% of 872 bridges

rated Delaware bridges, bucketed by value

Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.

Source FHWA National Bridge Inventory · August 2026

Condition Ratings

Culvert
6/9
Fair (5–6)
Inventory Load Rating
51.5 t
NBI inventory level (metric tons)
Overall Condition
Fair

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Sussex inventory by recorded NBI category

Exclusive Good/Fair/Poor bands across all 153 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.

Structural Details

Year Built
2013
Material
Concrete
Number of Spans
1
Structure Length
9.0 m (30 ft)
Deck Width
14.2 m (47 ft)
Owner
State Highway Agency
Avg Daily Traffic
5,657 vehicles/day
Structure Number
3583 026

How to read this record

This page shows what the last federal inspection recorded, not whether MILLSBORO HWY/SR26 is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare MILLSBORO HWY/SR26 against other structures in Sussex and across Delaware. Delaware bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for MILLSBORO HWY/SR26?

MILLSBORO HWY/SR26 in Sussex, Delaware on the FHWA's 0–9 scale.

How often is MILLSBORO HWY/SR26 inspected?

MILLSBORO HWY/SR26's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 5,657 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. MILLSBORO HWY/SR26 is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for MILLSBORO HWY/SR26?

MILLSBORO HWY/SR26 has an NBI inventory load rating of 51.5 metric tons.

Who is responsible for maintaining MILLSBORO HWY/SR26?

MILLSBORO HWY/SR26 is owned and maintained by State Highway Agency.

How old is MILLSBORO HWY/SR26 and does age affect safety?

MILLSBORO HWY/SR26 was built in 2013, making it 13 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Share this inspection record

Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.

XFacebookLinkedInWhatsAppEmail

Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.