Buckskin Drive
Carrying Buckskin Drive over Little Rawhide Creek
Gillette Streets, Campbell, Wyoming
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: Buckskin Drive
The Buckskin Drive bridge in Campbell, Wyoming carries Buckskin Drive over Little Rawhide Creek. It was built in 1985, making it 41 years old today. The structure is built primarily of concrete and spans 3 sections, stretching 10.1 meters (33 feet) end to end. Daily traffic averages 468 vehicles, placing it in the lower-traffic tier of Wyoming bridges. It is owned and maintained by City/Municipal Highway Agency.
The latest FHWA inspection records show culvert at 7/9. The weakest component sits in good condition. All reported major components score above the Poor range. Its NBI inventory load rating is 53.9 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How Buckskin Drive compares
Live comparison across Wyoming.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1985
- Material
- Concrete
- Number of Spans
- 3
- Structure Length
- 10.1 m (33 ft)
- Deck Width
- 15.5 m (51 ft)
- Owner
- City/Municipal Highway Agency
- Avg Daily Traffic
- 468 vehicles/day
- Structure Number
- FHK
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether Buckskin Drive is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare Buckskin Drive against other structures in Campbell and across Wyoming. Wyoming bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for Buckskin Drive?
Buckskin Drive in Campbell, Wyoming on the FHWA's 0–9 scale.
How often is Buckskin Drive inspected?
Buckskin Drive's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 468 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. Buckskin Drive is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for Buckskin Drive?
Buckskin Drive has an NBI inventory load rating of 53.9 metric tons.
Who is responsible for maintaining Buckskin Drive?
Buckskin Drive is owned and maintained by City/Municipal Highway Agency.
How old is Buckskin Drive and does age affect safety?
Buckskin Drive was built in 1985, making it 41 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.