MOUNT TABOR RD
Carrying MOUNT TABOR RD over MILL CREEK
00.10 W of HITCHCOCK Rd, Washington, Indiana
Inventory: FHWA NBI 2024 · last ETL August 2026
FHWA NBI record, refreshed with each annual release.
MOUNT TABOR RD in Washington, Indiana sits above 14% of rated Indiana bridges on inventory load rating (26 t), while its 1930 build year is earlier than 86% of Washington's recorded-year cohort (174 bridges).
MOUNT TABOR RD in Washington, Indiana is rated Good in the FHWA's 2024 National Bridge Inventory. Built in 1930, it carries 2 rated components on the inspecting agency's 0-9 scale, and its weakest reported component scores 7. The lowest applicable rating sets the federal condition category, so this Good result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.
NBI record plate
Structure IN:8800057
PRE-1950 · CONCRETE · SINGLE-SPAN · TIED-CTRL · LOCAL-ADT · STANDARD-LOAD · CAT-GOOD
- PRE-1950 Pre-1950
- CONCRETE Concrete
- SINGLE-SPAN Single span
- TIED-CTRL Tied control
- LOCAL-ADT Local ADT
- STANDARD-LOAD Standard load
- CAT-GOOD Good
Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.
Bridge Snapshot: MOUNT TABOR RD
The MOUNT TABOR RD bridge in Washington, Indiana carries MOUNT TABOR RD over MILL CREEK. It was built in 1930, making it 96 years old today. The structure is built primarily of concrete and spans 1 section, stretching 19.5 meters (64 feet) end to end. Daily traffic averages 225 vehicles, placing it in the lower-traffic tier of Indiana bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show superstructure at 7/9, substructure at 7/9. The weakest component sits in good condition. None of this bridge's reported major components fall into the Poor condition range.
How MOUNT TABOR RD compares
Age against the county: built in 1930, earlier than 150 of Washington's 174 bridges with a recorded construction year (86%), against a county median build year of 1982. Age is not a defect on its own, but it is the population from which future Poor ratings are drawn.
Live comparison across Indiana bridges with a recorded inventory load rating (19,495 rated).
MOUNT TABOR RD vs every rated Indiana bridge
Inventory load rating (metric tons), FHWA NBI, this state
26 Top 86% higher than 14% of 19,495 bridges
rated Indiana bridges, bucketed by value
Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.
Source FHWA National Bridge Inventory · August 2026
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Reported 0–9 component ratings from the FHWA NBI. The highlighted component is the lowest reported input to this record’s current condition category; it is not a closure or live crossing-safety decision.
Washington inventory by recorded NBI category
Exclusive Good/Fair/Poor bands across all 174 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.
Structural Details
- Year Built
- 1930
- Material
- Concrete
- Number of Spans
- 1
- Structure Length
- 19.5 m (64 ft)
- Deck Width
- 5.5 m (18 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 225 vehicles/day
- Structure Number
- 8800057
Condition Analysis
- • The superstructure (beams and supports above the deck) is in good condition (7/9), showing no significant deterioration.
- • The substructure (piers and abutments) is in good condition (7/9), showing no significant deterioration.
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether MOUNT TABOR RD is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare MOUNT TABOR RD against other structures in Washington and across Indiana. Indiana bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for MOUNT TABOR RD?
MOUNT TABOR RD in Washington, Indiana, superstructure rating of 7/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.
How often is MOUNT TABOR RD inspected?
MOUNT TABOR RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 225 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. MOUNT TABOR RD is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for MOUNT TABOR RD?
MOUNT TABOR RD has an NBI inventory load rating of 25.5 metric tons.
Who is responsible for maintaining MOUNT TABOR RD?
MOUNT TABOR RD is owned and maintained by County Highway Agency.
How old is MOUNT TABOR RD and does age affect safety?
MOUNT TABOR RD was built in 1930, making it 96 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Share this inspection record
Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.
Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.