FHWA NBI 2024 Inspection record Public-domain dataset

RYAN CANYON RD

Carrying RYAN CANYON RD over BEAVERHEAD RIVER 023

1.2M S BARRETTS INT, Beaverhead, Montana

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Poor
7 t Inventory load rating

Bridge Snapshot: RYAN CANYON RD

The RYAN CANYON RD bridge in Beaverhead, Montana carries RYAN CANYON RD over BEAVERHEAD RIVER 023. It was built in 1908, making it 118 years old today. The structure is built primarily of steel and spans 1 section, stretching 29.3 meters (96 feet) end to end. Daily traffic averages 14 vehicles, placing it in the lower-traffic tier of Montana bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 7/9, superstructure at 3/9, substructure at 5/9. The weakest component sits in poor condition. Because at least one major component scores 4 or lower, this bridge falls in FHWA's Poor condition category. That category is not a closure order. Its NBI inventory load rating is 7.3 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How RYAN CANYON RD compares

▼ 23.4
Load rating vs Montana average (30.7 t)
Bottom 2%
Lower load rating than 98% of Montana bridges
217
Bridges in Beaverhead · 20 in Poor condition
RYAN CANYON RD 7.3 t
Montana average 30.7 t

Live comparison across Montana.

Historical Sufficiency Rating

PlainBridge-computed
22.8 / 100 - historical 20–49.9 band
Structural adequacy /55
0.0
Serviceability /30
9.0
Essentiality /15
13.8
Special reductions
0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
7/9
Good (7–9)
Superstructure
3/9
Poor (1–4)
Substructure
5/9
Fair (5–6)
Inventory Load Rating
7.3 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1908
Material
Steel
Number of Spans
1
Structure Length
29.3 m (96 ft)
Deck Width
4.9 m (16 ft)
Owner
County Highway Agency
Avg Daily Traffic
14 vehicles/day
Structure Number
L01559000+02001

Condition Analysis

  • At 7/9, the deck (driving surface) is in good shape and shows no significant wear.
  • At 3/9, the superstructure (beams and supports above the deck) is in poor shape, with advanced wear flagged for priority repair.
  • The substructure (piers and abutments) is in fair condition (5/9), with minor deterioration that may require routine maintenance.

How to read this record

RYAN CANYON RD is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare RYAN CANYON RD against other structures in Beaverhead and across Montana. Montana bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for RYAN CANYON RD?

RYAN CANYON RD in Beaverhead, Montana has a deck rating of 7/9, superstructure rating of 3/9, and substructure rating of 5/9 on the FHWA's 0–9 scale.

How often is RYAN CANYON RD inspected?

RYAN CANYON RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 14 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. RYAN CANYON RD is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for RYAN CANYON RD?

RYAN CANYON RD has an NBI inventory load rating of 7.3 metric tons.

Who is responsible for maintaining RYAN CANYON RD?

RYAN CANYON RD is owned and maintained by County Highway Agency.

How old is RYAN CANYON RD and does age affect safety?

RYAN CANYON RD was built in 1908, making it 118 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.