CONLIN RD
Carrying CONLIN RD over EMIGRANT CREEK 075
3M SE EMMIGRANT, Park, Montana
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: CONLIN RD
The CONLIN RD bridge in Park, Montana carries CONLIN RD over EMIGRANT CREEK 075. It was built in 2008, making it 18 years old today. The structure is built primarily of aluminum/iron and spans 1 section, stretching 7.5 meters (25 feet) end to end. Daily traffic averages 100 vehicles, placing it in the lower-traffic tier of Montana bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show culvert at 5/9. The weakest component sits in fair condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 32.7 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How CONLIN RD compares
Live comparison across Montana.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2008
- Material
- Aluminum/Iron
- Number of Spans
- 1
- Structure Length
- 7.5 m (25 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 100 vehicles/day
- Structure Number
- L34211002+06001
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether CONLIN RD is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare CONLIN RD against other structures in Park and across Montana. Montana bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for CONLIN RD?
CONLIN RD in Park, Montana on the FHWA's 0–9 scale.
How often is CONLIN RD inspected?
CONLIN RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 100 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. CONLIN RD is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for CONLIN RD?
CONLIN RD has an NBI inventory load rating of 32.7 metric tons.
Who is responsible for maintaining CONLIN RD?
CONLIN RD is owned and maintained by County Highway Agency.
How old is CONLIN RD and does age affect safety?
CONLIN RD was built in 2008, making it 18 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.