TIBER FALLS DRIVE
Carrying TIBER FALLS DRIVE over TIBER BRANCH
500 NW OF OLD COLUMBIA P, Howard, Maryland
Inventory: FHWA NBI 2024 · last ETL August 2026
FHWA NBI record, refreshed with each annual release.
TIBER FALLS DRIVE in Howard, Maryland sits above 90% of rated Maryland bridges on inventory load rating (100 t), while its 2000 build year is earlier than 13% of Howard's recorded-year cohort (309 bridges).
TIBER FALLS DRIVE in Howard, Maryland is rated Good in the FHWA's 2024 National Bridge Inventory. Built in 2000, it carries 2 rated components on the inspecting agency's 0-9 scale, and its weakest reported component scores 7. The lowest applicable rating sets the federal condition category, so this Good result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.
NBI record plate
Structure MD:200000HO0281010
POST-2000 · STEEL · SINGLE-SPAN · TIED-CTRL · LOCAL-ADT · HEAVY-LOAD · CAT-GOOD
- POST-2000 2000+
- STEEL Steel
- SINGLE-SPAN Single span
- TIED-CTRL Tied control
- LOCAL-ADT Local ADT
- HEAVY-LOAD Heavy load
- CAT-GOOD Good
Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.
Bridge Snapshot: TIBER FALLS DRIVE
The TIBER FALLS DRIVE bridge in Howard, Maryland carries TIBER FALLS DRIVE over TIBER BRANCH. It was built in 2000, making it 26 years old today. The structure is built primarily of steel and spans 1 section, stretching 9.9 meters (32 feet) end to end. Daily traffic averages 50 vehicles, placing it in the lower-traffic tier of Maryland bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show superstructure at 7/9, substructure at 7/9. The weakest component sits in good condition. All reported major components score above the Poor range.
How TIBER FALLS DRIVE compares
Age against the county: built in 2000, earlier than 39 of Howard's 309 bridges with a recorded construction year (13%), against a county median build year of 1975. This is one of the newer structures in its county.
Live comparison across Maryland bridges with a recorded inventory load rating (5,479 of 5,484 rated).
TIBER FALLS DRIVE vs every rated Maryland bridge
Inventory load rating (metric tons), FHWA NBI, this state
100 Top 10% higher than 90% of 5,479 bridges
rated Maryland bridges, bucketed by value
Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.
Source FHWA National Bridge Inventory · August 2026
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Reported 0–9 component ratings from the FHWA NBI. The highlighted component is the lowest reported input to this record’s current condition category; it is not a closure or live crossing-safety decision.
Howard inventory by recorded NBI category
Exclusive Good/Fair/Poor bands across all 309 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.
Structural Details
- Year Built
- 2000
- Material
- Steel
- Number of Spans
- 1
- Structure Length
- 9.9 m (32 ft)
- Deck Width
- 10.5 m (34 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 50 vehicles/day
- Structure Number
- 200000HO0281010
Condition Analysis
- • At 7/9, the superstructure (beams and supports above the deck) is in good shape and shows no significant wear.
- • At 7/9, the substructure (piers and abutments) is in good shape and shows no significant wear.
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether TIBER FALLS DRIVE is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare TIBER FALLS DRIVE against other structures in Howard and across Maryland. Maryland bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for TIBER FALLS DRIVE?
TIBER FALLS DRIVE in Howard, Maryland, superstructure rating of 7/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.
How often is TIBER FALLS DRIVE inspected?
TIBER FALLS DRIVE's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 50 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. TIBER FALLS DRIVE is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for TIBER FALLS DRIVE?
TIBER FALLS DRIVE has an NBI inventory load rating of 99.9 metric tons.
Who is responsible for maintaining TIBER FALLS DRIVE?
TIBER FALLS DRIVE is owned and maintained by County Highway Agency.
How old is TIBER FALLS DRIVE and does age affect safety?
TIBER FALLS DRIVE was built in 2000, making it 26 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Share this inspection record
Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.
Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.