FHWA NBI 2024 Inspection record Public-domain dataset

CONNORS MILL ROAD

Carrying CONNORS MILL ROAD over SCHOODAC BROOK

0.9 MI FROM WEBSTER TL, Merrimack, New Hampshire

Inventory: FHWA NBI 2024 · last ETL August 2026

FHWA NBI record, refreshed with each annual release.

Good
35 t Inventory load rating Lower than 53% of rated New Hampshire bridges

CONNORS MILL ROAD in Merrimack, New Hampshire sits above 47% of rated New Hampshire bridges on inventory load rating (35 t), while its 2009 build year is earlier than 8% of Merrimack's recorded-year cohort (326 bridges).

CONNORS MILL ROAD in Merrimack, New Hampshire is rated Good in the FHWA's 2024 National Bridge Inventory. Built in 2009, it carries 3 rated components on the inspecting agency's 0-9 scale, and its weakest reported component scores 8. The lowest applicable rating sets the federal condition category, so this Good result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.

NBI record plate

Structure NH:026301940017200

POST-2000 · STEEL · SINGLE-SPAN · SUB-LED · LOCAL-ADT · STANDARD-LOAD · CAT-GOOD

  • POST-2000 2000+
  • STEEL Steel
  • SINGLE-SPAN Single span
  • SUB-LED Substructure-led
  • LOCAL-ADT Local ADT
  • STANDARD-LOAD Standard load
  • CAT-GOOD Good

Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.

Bridge Snapshot: CONNORS MILL ROAD

The CONNORS MILL ROAD bridge in Merrimack, New Hampshire carries CONNORS MILL ROAD over SCHOODAC BROOK. It was built in 2009, making it 17 years old today. The structure is built primarily of steel and spans 1 section, stretching 22.9 meters (75 feet) end to end. Daily traffic averages 90 vehicles, placing it in the lower-traffic tier of New Hampshire bridges. It is owned and maintained by City/Municipal Highway Agency.

The latest FHWA inspection records show a deck rating of 9/9, superstructure at 9/9, substructure at 8/9. The weakest component sits in good condition. None of this bridge's reported major components fall into the Poor condition range.

How CONNORS MILL ROAD compares

▼ 3.0
Load rating vs New Hampshire average (38.4 t; 2,540 of 2,542 rated)
326
Bridges in Merrimack · 26 in Poor condition

Age against the county: built in 2009, earlier than 26 of Merrimack's 326 bridges with a recorded construction year (8%), against a county median build year of 1966. This is one of the newer structures in its county.

CONNORS MILL ROAD 35.4 t
New Hampshire average (2,540 of 2,542 rated) 38.4 t

Live comparison across New Hampshire bridges with a recorded inventory load rating (2,540 of 2,542 rated).

CONNORS MILL ROAD vs every rated New Hampshire bridge

Inventory load rating (metric tons), FHWA NBI, this state

35 Top 53% higher than 47% of 2,540 bridges

rated New Hampshire bridges, bucketed by value

Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.

Source FHWA National Bridge Inventory · August 2026

Condition Ratings

Deck
9/9
Good (7–9)
Superstructure
9/9
Good (7–9)
Substructure
8/9
Good (7–9)
Inventory Load Rating
35.4 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Reported 0–9 component ratings from the FHWA NBI. The highlighted component is the lowest reported input to this record’s current condition category; it is not a closure or live crossing-safety decision.

Merrimack inventory by recorded NBI category

Exclusive Good/Fair/Poor bands across all 326 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.

Structural Details

Year Built
2009
Material
Steel
Number of Spans
1
Structure Length
22.9 m (75 ft)
Deck Width
8.4 m (28 ft)
Owner
City/Municipal Highway Agency
Avg Daily Traffic
90 vehicles/day
Structure Number
026301940017200

Condition Analysis

  • The deck (driving surface) is in good condition (9/9), showing no significant deterioration.
  • At 9/9, the superstructure (beams and supports above the deck) is in good shape and shows no significant wear.
  • At 8/9, the substructure (piers and abutments) is in good shape and shows no significant wear.

How to read this record

This page shows what the last federal inspection recorded, not whether CONNORS MILL ROAD is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare CONNORS MILL ROAD against other structures in Merrimack and across New Hampshire. New Hampshire bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for CONNORS MILL ROAD?

CONNORS MILL ROAD in Merrimack, New Hampshire has a deck rating of 9/9, superstructure rating of 9/9, and substructure rating of 8/9 on the FHWA's 0–9 scale.

How often is CONNORS MILL ROAD inspected?

CONNORS MILL ROAD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 90 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. CONNORS MILL ROAD is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for CONNORS MILL ROAD?

CONNORS MILL ROAD has an NBI inventory load rating of 35.4 metric tons.

Who is responsible for maintaining CONNORS MILL ROAD?

CONNORS MILL ROAD is owned and maintained by City/Municipal Highway Agency.

How old is CONNORS MILL ROAD and does age affect safety?

CONNORS MILL ROAD was built in 2009, making it 17 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Share this inspection record

Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.

XFacebookLinkedInWhatsAppEmail

Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.