BURMESTER DRIVE
Carrying BURMESTER DRIVE over S FORK NEAL CR
006 MI E CR 834, Linn, Oregon
Inventory: FHWA NBI 2024 · last ETL August 2026
FHWA NBI record, refreshed with each annual release.
BURMESTER DRIVE in Linn, Oregon sits above 80% of rated Oregon bridges on inventory load rating (44 t), while its 1968 build year is earlier than 44% of Linn's recorded-year cohort (566 bridges).
BURMESTER DRIVE in Linn, Oregon is rated Good in the FHWA's 2024 National Bridge Inventory. Built in 1968, it carries 3 rated components on the inspecting agency's 0-9 scale, and its weakest reported component scores 7. The lowest applicable rating sets the federal condition category, so this Good result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.
NBI record plate
Structure OR:12957 083300063
INTERSTATE-ERA · PRESTRESS · MULTI-SPAN · TIED-CTRL · LOCAL-ADT · HEAVY-LOAD · CAT-GOOD
- INTERSTATE-ERA 1950–1979
- PRESTRESS Prestressed concrete
- MULTI-SPAN 2 spans
- TIED-CTRL Tied control
- LOCAL-ADT Local ADT
- HEAVY-LOAD Heavy load
- CAT-GOOD Good
Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.
Bridge Snapshot: BURMESTER DRIVE
The BURMESTER DRIVE bridge in Linn, Oregon carries BURMESTER DRIVE over S FORK NEAL CR. It was built in 1968, making it 58 years old today. The structure is built primarily of prestressed concrete and spans 2 sections, stretching 21.9 meters (72 feet) end to end. Daily traffic averages 62 vehicles, placing it in the lower-traffic tier of Oregon bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show a deck rating of 7/9, superstructure at 7/9, substructure at 7/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds.
How BURMESTER DRIVE compares
Age against the county: built in 1968, earlier than 250 of Linn's 566 bridges with a recorded construction year (44%), against a county median build year of 1967. This is one of the newer structures in its county.
Live comparison across Oregon bridges with a recorded inventory load rating (8,282 of 8,305 rated).
BURMESTER DRIVE vs every rated Oregon bridge
Inventory load rating (metric tons), FHWA NBI, this state
44 Top 20% higher than 80% of 8,282 bridges
rated Oregon bridges, bucketed by value
Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.
Source FHWA National Bridge Inventory · August 2026
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Reported 0–9 component ratings from the FHWA NBI. The highlighted component is the lowest reported input to this record’s current condition category; it is not a closure or live crossing-safety decision.
Linn inventory by recorded NBI category
Exclusive Good/Fair/Poor bands across all 566 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.
Structural Details
- Year Built
- 1968
- Material
- Prestressed Concrete
- Number of Spans
- 2
- Structure Length
- 21.9 m (72 ft)
- Deck Width
- 7.3 m (24 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 62 vehicles/day
- Structure Number
- 12957 083300063
Condition Analysis
- • At 7/9, the deck (driving surface) is in good shape and shows no significant wear.
- • The superstructure (beams and supports above the deck) rates good at 7/9, with no significant deterioration on file.
- • The substructure (piers and abutments) rates good at 7/9, with no significant deterioration on file.
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether BURMESTER DRIVE is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare BURMESTER DRIVE against other structures in Linn and across Oregon. Oregon bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for BURMESTER DRIVE?
BURMESTER DRIVE in Linn, Oregon has a deck rating of 7/9, superstructure rating of 7/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.
How often is BURMESTER DRIVE inspected?
BURMESTER DRIVE's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 62 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. BURMESTER DRIVE is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for BURMESTER DRIVE?
BURMESTER DRIVE has an NBI inventory load rating of 43.5 metric tons.
Who is responsible for maintaining BURMESTER DRIVE?
BURMESTER DRIVE is owned and maintained by County Highway Agency.
How old is BURMESTER DRIVE and does age affect safety?
BURMESTER DRIVE was built in 1968, making it 58 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Share this inspection record
Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.
Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.