Oxford Circle
Carrying Oxford Circle over Stewart Slough
0.01 Inter Lancaster, Benton, Oregon
Inventory: FHWA NBI 2024 · last ETL August 2026
FHWA NBI record, refreshed with each annual release.
Oxford Circle in Benton, Oregon sits above 19% of rated Oregon bridges on inventory load rating (19 t), while its 2013 build year is earlier than 6% of Benton's recorded-year cohort (190 bridges).
Oxford Circle in Benton, Oregon is rated Good in the FHWA's 2024 National Bridge Inventory. Built in 2013, it carries 3 rated components on the inspecting agency's 0-9 scale, and its weakest reported component scores 7. The lowest applicable rating sets the federal condition category, so this Good result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.
NBI record plate
Structure OR:22141 000 00000
POST-2000 · PRESTRESS · SINGLE-SPAN · TIED-CTRL · LOCAL-ADT · LIGHT-LOAD · CAT-GOOD
- POST-2000 2000+
- PRESTRESS Prestressed concrete
- SINGLE-SPAN Single span
- TIED-CTRL Tied control
- LOCAL-ADT Local ADT
- LIGHT-LOAD Light load
- CAT-GOOD Good
Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.
Bridge Snapshot: Oxford Circle
The Oxford Circle bridge in Benton, Oregon carries Oxford Circle over Stewart Slough. It was built in 2013, making it 13 years old today. The structure is built primarily of prestressed concrete and spans 1 section, stretching 12.2 meters (40 feet) end to end. Daily traffic averages 343 vehicles, placing it in the lower-traffic tier of Oregon bridges. It is owned and maintained by City/Municipal Highway Agency.
The latest FHWA inspection records show a deck rating of 7/9, superstructure at 7/9, substructure at 7/9. The weakest component sits in good condition. None of this bridge's reported major components fall into the Poor condition range.
How Oxford Circle compares
Age against the county: built in 2013, earlier than 12 of Benton's 190 bridges with a recorded construction year (6%), against a county median build year of 1966. This is one of the newer structures in its county.
Live comparison across Oregon bridges with a recorded inventory load rating (8,282 of 8,305 rated).
Oxford Circle vs every rated Oregon bridge
Inventory load rating (metric tons), FHWA NBI, this state
19 Top 81% higher than 19% of 8,282 bridges
rated Oregon bridges, bucketed by value
Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.
Source FHWA National Bridge Inventory · August 2026
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Reported 0–9 component ratings from the FHWA NBI. The highlighted component is the lowest reported input to this record’s current condition category; it is not a closure or live crossing-safety decision.
Benton inventory by recorded NBI category
Exclusive Good/Fair/Poor bands across all 190 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.
Structural Details
- Year Built
- 2013
- Material
- Prestressed Concrete
- Number of Spans
- 1
- Structure Length
- 12.2 m (40 ft)
- Deck Width
- 13.1 m (43 ft)
- Owner
- City/Municipal Highway Agency
- Avg Daily Traffic
- 343 vehicles/day
- Structure Number
- 22141 000 00000
Condition Analysis
- • The deck (driving surface) rates good at 7/9, with no significant deterioration on file.
- • The superstructure (beams and supports above the deck) rates good at 7/9, with no significant deterioration on file.
- • At 7/9, the substructure (piers and abutments) is in good shape and shows no significant wear.
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether Oxford Circle is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare Oxford Circle against other structures in Benton and across Oregon. Oregon bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for Oxford Circle?
Oxford Circle in Benton, Oregon has a deck rating of 7/9, superstructure rating of 7/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.
How often is Oxford Circle inspected?
Oxford Circle's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 343 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. Oxford Circle is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for Oxford Circle?
Oxford Circle has an NBI inventory load rating of 19.4 metric tons.
Who is responsible for maintaining Oxford Circle?
Oxford Circle is owned and maintained by City/Municipal Highway Agency.
How old is Oxford Circle and does age affect safety?
Oxford Circle was built in 2013, making it 13 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Share this inspection record
Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.
Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.