LRD 180TH AVENUE
Carrying LRD 180TH AVENUE over MCCANN CREEK
1.4 M E CTH GG, Chippewa, Wisconsin
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: LRD 180TH AVENUE
The LRD 180TH AVENUE bridge in Chippewa, Wisconsin carries LRD 180TH AVENUE over MCCANN CREEK. It was built in 1974, making it 52 years old today. The structure is built primarily of steel and spans 2 sections, stretching 7.3 meters (24 feet) end to end. Daily traffic averages 165 vehicles, placing it in the lower-traffic tier of Wisconsin bridges. It is owned and maintained by Town/Township Highway Agency.
The latest FHWA inspection records show culvert at 7/9. The weakest component sits in good condition. All reported major components score above the Poor range. Its NBI inventory load rating is 24.3 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How LRD 180TH AVENUE compares
Live comparison across Wisconsin.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1974
- Material
- Steel
- Number of Spans
- 2
- Structure Length
- 7.3 m (24 ft)
- Owner
- Town/Township Highway Agency
- Avg Daily Traffic
- 165 vehicles/day
- Structure Number
- P09012600000000
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether LRD 180TH AVENUE is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare LRD 180TH AVENUE against other structures in Chippewa and across Wisconsin. Wisconsin bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for LRD 180TH AVENUE?
LRD 180TH AVENUE in Chippewa, Wisconsin on the FHWA's 0–9 scale.
How often is LRD 180TH AVENUE inspected?
LRD 180TH AVENUE's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 165 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. LRD 180TH AVENUE is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for LRD 180TH AVENUE?
LRD 180TH AVENUE has an NBI inventory load rating of 24.3 metric tons.
Who is responsible for maintaining LRD 180TH AVENUE?
LRD 180TH AVENUE is owned and maintained by Town/Township Highway Agency.
How old is LRD 180TH AVENUE and does age affect safety?
LRD 180TH AVENUE was built in 1974, making it 52 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.