FHWA NBI 2024 Inspection record Public-domain dataset

BRIGHTON HEIGHTS

Carrying BRIGHTON HEIGHTS over VERNER AVENUE

112 Brighton Heights Blvd, Allegheny, Pennsylvania

Inventory: FHWA NBI 2024 · last ETL August 2026

FHWA NBI record, refreshed with each annual release.

Poor
34 t Inventory load rating Lower than 64% of rated Pennsylvania bridges

BRIGHTON HEIGHTS in Allegheny, Pennsylvania sits above 36% of rated Pennsylvania bridges on inventory load rating (34 t), while its 1930 build year is earlier than 86% of Allegheny's recorded-year cohort (1,294 bridges).

BRIGHTON HEIGHTS in Allegheny, Pennsylvania is rated Poor in the FHWA's 2024 National Bridge Inventory. Built in 1930, it carries 3 rated components on the inspecting agency's 0-9 scale, and its weakest reported component scores 4. The lowest applicable rating sets the federal condition category, so this Poor result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.

NBI record plate

Structure PA:000000000002458

PRE-1950 · PRESTRESS · SINGLE-SPAN · SUB-LED · HEAVY-ADT · STANDARD-LOAD · CAT-POOR

  • PRE-1950 Pre-1950
  • PRESTRESS Prestressed concrete
  • SINGLE-SPAN Single span
  • SUB-LED Substructure-led
  • HEAVY-ADT Heavy ADT
  • STANDARD-LOAD Standard load
  • CAT-POOR Poor

Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.

Bridge Snapshot: BRIGHTON HEIGHTS

The BRIGHTON HEIGHTS bridge in Allegheny, Pennsylvania carries BRIGHTON HEIGHTS over VERNER AVENUE. It was built in 1930, making it 96 years old today. It was last reconstructed in 1980, extending its service life. The structure is built primarily of prestressed concrete and spans 1 section, stretching 22.9 meters (75 feet) end to end. Daily traffic averages 13,100 vehicles, placing it in the heavily-trafficked tier of Pennsylvania bridges. It is owned and maintained by City/Municipal Highway Agency.

The latest FHWA inspection records show a deck rating of 5/9, superstructure at 7/9, substructure at 4/9. The weakest component sits in poor condition. Because at least one major component scores 4 or lower, this bridge falls in FHWA's Poor condition category. That category is not a closure order.

How BRIGHTON HEIGHTS compares

▼ 4.8
Load rating vs Pennsylvania average (38.4 t; 23,297 of 23,299 rated)
1,294
Bridges in Allegheny · 115 in Poor condition

Age against the county: built in 1930, earlier than 1,107 of Allegheny's 1,294 bridges with a recorded construction year (86%), against a county median build year of 1968. Age is not a defect on its own, but it is the population from which future Poor ratings are drawn.

BRIGHTON HEIGHTS 33.6 t
Pennsylvania average (23,297 of 23,299 rated) 38.4 t

Live comparison across Pennsylvania bridges with a recorded inventory load rating (23,297 of 23,299 rated).

BRIGHTON HEIGHTS vs every rated Pennsylvania bridge

Inventory load rating (metric tons), FHWA NBI, this state

34 Top 64% higher than 36% of 23,297 bridges

rated Pennsylvania bridges, bucketed by value

Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.

Source FHWA National Bridge Inventory · August 2026

Condition Ratings

Deck
5/9
Fair (5–6)
Superstructure
7/9
Good (7–9)
Substructure
4/9
Poor (1–4)
Inventory Load Rating
33.6 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Reported 0–9 component ratings from the FHWA NBI. The highlighted component is the lowest reported input to this record’s current condition category; it is not a closure or live crossing-safety decision.

Allegheny inventory by recorded NBI category

Exclusive Good/Fair/Poor bands across all 1,294 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.

Structural Details

Year Built
1930
Last Reconstructed
1980
Material
Prestressed Concrete
Number of Spans
1
Structure Length
22.9 m (75 ft)
Deck Width
18.0 m (59 ft)
Owner
City/Municipal Highway Agency
Avg Daily Traffic
13,100 vehicles/day
Structure Number
000000000002458

Condition Analysis

  • At 5/9, the deck (driving surface) shows fair condition, with minor wear flagged for upkeep.
  • At 7/9, the superstructure (beams and supports above the deck) is in good shape and shows no significant wear.
  • The substructure (piers and abutments) is in poor condition (4/9), showing advanced deterioration on the inspecting agency's 0-9 scale.

How to read this record

BRIGHTON HEIGHTS is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare BRIGHTON HEIGHTS against other structures in Allegheny and across Pennsylvania. Pennsylvania bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for BRIGHTON HEIGHTS?

BRIGHTON HEIGHTS in Allegheny, Pennsylvania has a deck rating of 5/9, superstructure rating of 7/9, and substructure rating of 4/9 on the FHWA's 0–9 scale.

How often is BRIGHTON HEIGHTS inspected?

BRIGHTON HEIGHTS's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 13,100 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. BRIGHTON HEIGHTS is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for BRIGHTON HEIGHTS?

BRIGHTON HEIGHTS has an NBI inventory load rating of 33.6 metric tons.

Who is responsible for maintaining BRIGHTON HEIGHTS?

BRIGHTON HEIGHTS is owned and maintained by City/Municipal Highway Agency.

How old is BRIGHTON HEIGHTS and does age affect safety?

BRIGHTON HEIGHTS was built in 1930, making it 96 years old and last reconstructed in 1980.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Share this inspection record

Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.

XFacebookLinkedInWhatsAppEmail

Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.