US222Beaver Valley
Carrying US222Beaver Valley over Pequea Creek
1 mi N of Refton, Lancaster, Pennsylvania
Inventory: FHWA NBI 2024 · last ETL August 2026
FHWA NBI record, refreshed with each annual release.
US222Beaver Valley in Lancaster, Pennsylvania sits above 36% of rated Pennsylvania bridges on inventory load rating (34 t), while its 1956 build year is earlier than 72% of Lancaster's recorded-year cohort (801 bridges).
US222Beaver Valley in Lancaster, Pennsylvania is rated Fair in the FHWA's 2024 National Bridge Inventory. Built in 1956, it carries 3 rated components on the inspecting agency's 0-9 scale, and its weakest reported component scores 5. The lowest applicable rating sets the federal condition category, so this Fair result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.
NBI record plate
Structure PA:000000000021067
INTERSTATE-ERA · PRESTRESS · MULTI-SPAN · SUB-LED · HEAVY-ADT · STANDARD-LOAD · CAT-FAIR
- INTERSTATE-ERA 1950–1979
- PRESTRESS Prestressed concrete
- MULTI-SPAN 3 spans
- SUB-LED Substructure-led
- HEAVY-ADT Heavy ADT
- STANDARD-LOAD Standard load
- CAT-FAIR Fair
Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.
Bridge Snapshot: US222Beaver Valley
The US222Beaver Valley bridge in Lancaster, Pennsylvania carries US222Beaver Valley over Pequea Creek. It was built in 1956, making it 70 years old today. It was last reconstructed in 2003, extending its service life. The structure is built primarily of prestressed concrete continuous and spans 3 sections, stretching 64.9 meters (213 feet) end to end. Daily traffic averages 11,919 vehicles, placing it in the heavily-trafficked tier of Pennsylvania bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show a deck rating of 7/9, superstructure at 8/9, substructure at 5/9. The weakest component sits in fair condition. No reported major component scores in the Poor range under the current federal condition thresholds.
How US222Beaver Valley compares
Age against the county: built in 1956, earlier than 574 of Lancaster's 801 bridges with a recorded construction year (72%), against a county median build year of 1972. Age is not a defect on its own, but it is the population from which future Poor ratings are drawn.
Live comparison across Pennsylvania bridges with a recorded inventory load rating (23,297 of 23,299 rated).
US222Beaver Valley vs every rated Pennsylvania bridge
Inventory load rating (metric tons), FHWA NBI, this state
34 Top 64% higher than 36% of 23,297 bridges
rated Pennsylvania bridges, bucketed by value
Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.
Source FHWA National Bridge Inventory · August 2026
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Reported 0–9 component ratings from the FHWA NBI. The highlighted component is the lowest reported input to this record’s current condition category; it is not a closure or live crossing-safety decision.
Lancaster inventory by recorded NBI category
Exclusive Good/Fair/Poor bands across all 801 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.
Structural Details
- Year Built
- 1956
- Last Reconstructed
- 2003
- Material
- Prestressed Concrete Continuous
- Number of Spans
- 3
- Structure Length
- 64.9 m (213 ft)
- Deck Width
- 11.0 m (36 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 11,919 vehicles/day
- Structure Number
- 000000000021067
Condition Analysis
- • The deck (driving surface) rates good at 7/9, with no significant deterioration on file.
- • The superstructure (beams and supports above the deck) rates good at 8/9, with no significant deterioration on file.
- • The substructure (piers and abutments) is in fair condition (5/9), with minor deterioration that may require routine maintenance.
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether US222Beaver Valley is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare US222Beaver Valley against other structures in Lancaster and across Pennsylvania. Pennsylvania bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for US222Beaver Valley?
US222Beaver Valley in Lancaster, Pennsylvania has a deck rating of 7/9, superstructure rating of 8/9, and substructure rating of 5/9 on the FHWA's 0–9 scale.
How often is US222Beaver Valley inspected?
US222Beaver Valley's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 11,919 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. US222Beaver Valley is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for US222Beaver Valley?
US222Beaver Valley has an NBI inventory load rating of 33.6 metric tons.
Who is responsible for maintaining US222Beaver Valley?
US222Beaver Valley is owned and maintained by State Highway Agency.
How old is US222Beaver Valley and does age affect safety?
US222Beaver Valley was built in 1956, making it 70 years old and last reconstructed in 2003.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Share this inspection record
Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.
Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.