FHWA NBI 2024 Inspection record Public-domain dataset

PA 501; fur.hill

Carrying PA 501; fur.hill over FURNACE RUN

1.5 MI. N. OF BRICKERVILE, Lancaster, Pennsylvania

Inventory: FHWA NBI 2024 · last ETL August 2026

FHWA NBI record, refreshed with each annual release.

Poor
36 t Inventory load rating Lower than 54% of rated Pennsylvania bridges

PA 501; fur.hill in Lancaster, Pennsylvania sits above 46% of rated Pennsylvania bridges on inventory load rating (36 t), while its 1930 build year is earlier than 90% of Lancaster's recorded-year cohort (801 bridges).

PA 501; fur.hill in Lancaster, Pennsylvania is rated Poor in the FHWA's 2024 National Bridge Inventory. Built in 1930, it carries 3 rated components on the inspecting agency's 0-9 scale, and its weakest reported component scores 4. The lowest applicable rating sets the federal condition category, so this Poor result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.

NBI record plate

Structure PA:000000000021289

PRE-1950 · CONCRETE · SINGLE-SPAN · TIED-CTRL · ARTERIAL-ADT · STANDARD-LOAD · CAT-POOR

  • PRE-1950 Pre-1950
  • CONCRETE Concrete
  • SINGLE-SPAN Single span
  • TIED-CTRL Tied control
  • ARTERIAL-ADT Arterial ADT
  • STANDARD-LOAD Standard load
  • CAT-POOR Poor

Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.

Bridge Snapshot: PA 501; fur.hill

The PA 501; fur.hill bridge in Lancaster, Pennsylvania carries PA 501; fur.hill over FURNACE RUN. It was built in 1930, making it 96 years old today. The structure is built primarily of concrete and spans 1 section, stretching 7.6 meters (25 feet) end to end. Daily traffic averages 9,813 vehicles, placing it in the moderately-trafficked tier of Pennsylvania bridges. It is owned and maintained by State Highway Agency.

The latest FHWA inspection records show a deck rating of 5/9, superstructure at 4/9, substructure at 4/9. The weakest component sits in poor condition. Because at least one major component scores 4 or lower, this bridge falls in FHWA's Poor condition category. That category is not a closure order.

How PA 501; fur.hill compares

▼ 2.1
Load rating vs Pennsylvania average (38.4 t; 23,297 of 23,299 rated)
801
Bridges in Lancaster · 90 in Poor condition

Age against the county: built in 1930, earlier than 721 of Lancaster's 801 bridges with a recorded construction year (90%), against a county median build year of 1972. Age is not a defect on its own, but it is the population from which future Poor ratings are drawn.

PA 501; fur.hill 36.3 t
Pennsylvania average (23,297 of 23,299 rated) 38.4 t

Live comparison across Pennsylvania bridges with a recorded inventory load rating (23,297 of 23,299 rated).

PA 501; fur.hill vs every rated Pennsylvania bridge

Inventory load rating (metric tons), FHWA NBI, this state

36 Top 54% higher than 46% of 23,297 bridges

rated Pennsylvania bridges, bucketed by value

Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.

Source FHWA National Bridge Inventory · August 2026

Condition Ratings

Deck
5/9
Fair (5–6)
Superstructure
4/9
Poor (1–4)
Substructure
4/9
Poor (1–4)
Inventory Load Rating
36.3 t
NBI inventory level (metric tons)
Overall Condition
Poor

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Reported 0–9 component ratings from the FHWA NBI. The highlighted component is the lowest reported input to this record’s current condition category; it is not a closure or live crossing-safety decision.

Lancaster inventory by recorded NBI category

Exclusive Good/Fair/Poor bands across all 801 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.

Structural Details

Year Built
1930
Material
Concrete
Number of Spans
1
Structure Length
7.6 m (25 ft)
Deck Width
9.9 m (32 ft)
Owner
State Highway Agency
Avg Daily Traffic
9,813 vehicles/day
Structure Number
000000000021289

Condition Analysis

  • The deck (driving surface) is in fair condition (5/9), with minor deterioration that may require routine maintenance.
  • At 4/9, the superstructure (beams and supports above the deck) is in poor shape, with advanced wear on file for this vintage.
  • The substructure (piers and abutments) is in poor condition (4/9), showing advanced deterioration on the inspecting agency's 0-9 scale.

How to read this record

PA 501; fur.hill is in the federal Poor condition category. That is a component-based result, not a closure order.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
  • Compare PA 501; fur.hill against other structures in Lancaster and across Pennsylvania. Pennsylvania bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for PA 501; fur.hill?

PA 501; fur.hill in Lancaster, Pennsylvania has a deck rating of 5/9, superstructure rating of 4/9, and substructure rating of 4/9 on the FHWA's 0–9 scale.

How often is PA 501; fur.hill inspected?

PA 501; fur.hill's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 9,813 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. PA 501; fur.hill is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for PA 501; fur.hill?

PA 501; fur.hill has an NBI inventory load rating of 36.3 metric tons.

Who is responsible for maintaining PA 501; fur.hill?

PA 501; fur.hill is owned and maintained by State Highway Agency.

How old is PA 501; fur.hill and does age affect safety?

PA 501; fur.hill was built in 1930, making it 96 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Share this inspection record

Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.

XFacebookLinkedInWhatsAppEmail

Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.