FHWA NBI 2024 Inspection record Public-domain dataset

MULBERRY HILL ROAD

Carrying MULBERRY HILL ROAD over GEORGES RUN

300 W OF SR18 INTERSECT, Washington, Pennsylvania

Inventory: FHWA NBI 2024 · last ETL August 2026

FHWA NBI record, refreshed with each annual release.

Fair
47 t Inventory load rating Higher than 79% of rated Pennsylvania bridges

MULBERRY HILL ROAD in Washington, Pennsylvania sits above 79% of rated Pennsylvania bridges on inventory load rating (47 t), while its 1984 build year is earlier than 42% of Washington's recorded-year cohort (655 bridges).

MULBERRY HILL ROAD in Washington, Pennsylvania is rated Fair in the FHWA's 2024 National Bridge Inventory. Built in 1984, it carries 3 rated components on the inspecting agency's 0-9 scale, and its weakest reported component scores 5. The lowest applicable rating sets the federal condition category, so this Fair result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.

NBI record plate

Structure PA:000000000039918

LATE-CENTURY · STEEL · SINGLE-SPAN · SUB-LED · LOCAL-ADT · HEAVY-LOAD · CAT-FAIR

  • LATE-CENTURY 1980–1999
  • STEEL Steel
  • SINGLE-SPAN Single span
  • SUB-LED Substructure-led
  • LOCAL-ADT Local ADT
  • HEAVY-LOAD Heavy load
  • CAT-FAIR Fair

Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.

Bridge Snapshot: MULBERRY HILL ROAD

The MULBERRY HILL ROAD bridge in Washington, Pennsylvania carries MULBERRY HILL ROAD over GEORGES RUN. It was built in 1984, making it 42 years old today. It was last reconstructed in 2022, extending its service life. The structure is built primarily of steel and spans 1 section, stretching 8.5 meters (28 feet) end to end. Daily traffic averages 100 vehicles, placing it in the lower-traffic tier of Pennsylvania bridges. It is owned and maintained by Town/Township Highway Agency.

The latest FHWA inspection records show a deck rating of 8/9, superstructure at 8/9, substructure at 5/9. The weakest component sits in fair condition. None of this bridge's reported major components fall into the Poor condition range.

How MULBERRY HILL ROAD compares

▲ 8.3
Load rating vs Pennsylvania average (38.4 t; 23,297 of 23,299 rated)
655
Bridges in Washington · 79 in Poor condition

Age against the county: built in 1984, earlier than 274 of Washington's 655 bridges with a recorded construction year (42%), against a county median build year of 1966. This is one of the newer structures in its county.

MULBERRY HILL ROAD 46.7 t
Pennsylvania average (23,297 of 23,299 rated) 38.4 t

Live comparison across Pennsylvania bridges with a recorded inventory load rating (23,297 of 23,299 rated).

MULBERRY HILL ROAD vs every rated Pennsylvania bridge

Inventory load rating (metric tons), FHWA NBI, this state

47 Top 21% higher than 79% of 23,297 bridges

rated Pennsylvania bridges, bucketed by value

Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.

Source FHWA National Bridge Inventory · August 2026

Condition Ratings

Deck
8/9
Good (7–9)
Superstructure
8/9
Good (7–9)
Substructure
5/9
Fair (5–6)
Inventory Load Rating
46.7 t
NBI inventory level (metric tons)
Overall Condition
Fair

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Reported 0–9 component ratings from the FHWA NBI. The highlighted component is the lowest reported input to this record’s current condition category; it is not a closure or live crossing-safety decision.

Washington inventory by recorded NBI category

Exclusive Good/Fair/Poor bands across all 655 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.

Structural Details

Year Built
1984
Last Reconstructed
2022
Material
Steel
Number of Spans
1
Structure Length
8.5 m (28 ft)
Deck Width
8.5 m (28 ft)
Owner
Town/Township Highway Agency
Avg Daily Traffic
100 vehicles/day
Structure Number
000000000039918

Condition Analysis

  • At 8/9, the deck (driving surface) is in good shape and shows no significant wear.
  • At 8/9, the superstructure (beams and supports above the deck) is in good shape and shows no significant wear.
  • The substructure (piers and abutments) is in fair condition (5/9), with minor deterioration that may require routine maintenance.

How to read this record

This page shows what the last federal inspection recorded, not whether MULBERRY HILL ROAD is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare MULBERRY HILL ROAD against other structures in Washington and across Pennsylvania. Pennsylvania bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for MULBERRY HILL ROAD?

MULBERRY HILL ROAD in Washington, Pennsylvania has a deck rating of 8/9, superstructure rating of 8/9, and substructure rating of 5/9 on the FHWA's 0–9 scale.

How often is MULBERRY HILL ROAD inspected?

MULBERRY HILL ROAD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 100 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. MULBERRY HILL ROAD is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for MULBERRY HILL ROAD?

MULBERRY HILL ROAD has an NBI inventory load rating of 46.7 metric tons.

Who is responsible for maintaining MULBERRY HILL ROAD?

MULBERRY HILL ROAD is owned and maintained by Town/Township Highway Agency.

How old is MULBERRY HILL ROAD and does age affect safety?

MULBERRY HILL ROAD was built in 1984, making it 42 years old and last reconstructed in 2022.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Share this inspection record

Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.

XFacebookLinkedInWhatsAppEmail

Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.