FHWA NBI 2024 Inspection record Public-domain dataset

OCONNER BLVD

Carrying OCONNER BLVD over LAKE CREEK

1.10 MI S OF RM 620, Williamson, Texas

Inventory: FHWA NBI 2024 · last ETL August 2026

FHWA NBI record, refreshed with each annual release.

Good
33 t Inventory load rating Higher than 53% of rated Texas bridges

OCONNER BLVD in Williamson, Texas sits above 53% of rated Texas bridges on inventory load rating (33 t), while its 2012 build year is earlier than 20% of Williamson's recorded-year cohort (1,170 bridges).

OCONNER BLVD in Williamson, Texas is rated Good in the FHWA's 2024 National Bridge Inventory. Built in 2012, it carries 3 rated components on the inspecting agency's 0-9 scale, and its weakest reported component scores 7. The lowest applicable rating sets the federal condition category, so this Good result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.

NBI record plate

Structure TX:142460AA7001001

POST-2000 · PRESTRESS · LONG-SPAN-RUN · TIED-CTRL · ARTERIAL-ADT · STANDARD-LOAD · CAT-GOOD

  • POST-2000 2000+
  • PRESTRESS Prestressed concrete
  • LONG-SPAN-RUN 7 spans
  • TIED-CTRL Tied control
  • ARTERIAL-ADT Arterial ADT
  • STANDARD-LOAD Standard load
  • CAT-GOOD Good

Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.

Bridge Snapshot: OCONNER BLVD

The OCONNER BLVD bridge in Williamson, Texas carries OCONNER BLVD over LAKE CREEK. It was built in 2012, making it 14 years old today. It was last reconstructed in 2014, extending its service life. The structure is built primarily of prestressed concrete and spans 7 sections, stretching 277.1 meters (909 feet) end to end. Daily traffic averages 2,000 vehicles, placing it in the moderately-trafficked tier of Texas bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 7/9, superstructure at 8/9, substructure at 7/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds.

How OCONNER BLVD compares

▲ 3.7
Load rating vs Texas average (29.0 t; 56,715 of 56,729 rated)
1,170
Bridges in Williamson · 4 in Poor condition

Age against the county: built in 2012, earlier than 239 of Williamson's 1,170 bridges with a recorded construction year (20%), against a county median build year of 2003. This is one of the newer structures in its county.

OCONNER BLVD 32.7 t
Texas average (56,715 of 56,729 rated) 29.0 t

Live comparison across Texas bridges with a recorded inventory load rating (56,715 of 56,729 rated).

OCONNER BLVD vs every rated Texas bridge

Inventory load rating (metric tons), FHWA NBI, this state

33 Top 47% higher than 53% of 56,715 bridges

rated Texas bridges, bucketed by value

Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.

Source FHWA National Bridge Inventory · August 2026

Condition Ratings

Deck
7/9
Good (7–9)
Superstructure
8/9
Good (7–9)
Substructure
7/9
Good (7–9)
Inventory Load Rating
32.7 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Reported 0–9 component ratings from the FHWA NBI. The highlighted component is the lowest reported input to this record’s current condition category; it is not a closure or live crossing-safety decision.

Williamson inventory by recorded NBI category

Exclusive Good/Fair/Poor bands across all 1,170 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.

Structural Details

Year Built
2012
Last Reconstructed
2014
Material
Prestressed Concrete
Number of Spans
7
Structure Length
277.1 m (909 ft)
Deck Width
23.5 m (77 ft)
Owner
County Highway Agency
Avg Daily Traffic
2,000 vehicles/day
Structure Number
142460AA7001001

Condition Analysis

  • The deck (driving surface) rates good at 7/9, with no significant deterioration on file.
  • At 8/9, the superstructure (beams and supports above the deck) is in good shape and shows no significant wear.
  • At 7/9, the substructure (piers and abutments) is in good shape and shows no significant wear.

How to read this record

This page shows what the last federal inspection recorded, not whether OCONNER BLVD is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare OCONNER BLVD against other structures in Williamson and across Texas. Texas bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for OCONNER BLVD?

OCONNER BLVD in Williamson, Texas has a deck rating of 7/9, superstructure rating of 8/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.

How often is OCONNER BLVD inspected?

OCONNER BLVD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 2,000 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. OCONNER BLVD is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for OCONNER BLVD?

OCONNER BLVD has an NBI inventory load rating of 32.7 metric tons.

Who is responsible for maintaining OCONNER BLVD?

OCONNER BLVD is owned and maintained by County Highway Agency.

How old is OCONNER BLVD and does age affect safety?

OCONNER BLVD was built in 2012, making it 14 years old and last reconstructed in 2014.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Share this inspection record

Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.

XFacebookLinkedInWhatsAppEmail

Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.