FHWA NBI 2024 Inspection record Public-domain dataset

Buffalo-Willson Rd

Carrying Buffalo-Willson Rd over LITTLE PEND OREILLE RIVE

1.23 SE KITT-NARCISSE RD., Stevens, Washington

Inventory: FHWA NBI 2024 · last ETL August 2026

FHWA NBI record, refreshed with each annual release.

Fair
22 t Inventory load rating Lower than 77% of rated Washington bridges

Buffalo-Willson Rd in Stevens, Washington sits above 23% of rated Washington bridges on inventory load rating (22 t), while its 1975 build year is earlier than 32% of Stevens's recorded-year cohort (75 bridges).

Buffalo-Willson Rd in Stevens, Washington is rated Fair in the FHWA's 2024 National Bridge Inventory. Built in 1975, it carries 3 rated components on the inspecting agency's 0-9 scale, and its weakest reported component scores 5. The lowest applicable rating sets the federal condition category, so this Fair result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.

NBI record plate

Structure WA:080356000000000

INTERSTATE-ERA · PRESTRESS · SINGLE-SPAN · SUB-LED · TRACE-ADT · STANDARD-LOAD · CAT-FAIR

  • INTERSTATE-ERA 1950–1979
  • PRESTRESS Prestressed concrete
  • SINGLE-SPAN Single span
  • SUB-LED Substructure-led
  • TRACE-ADT Trace ADT
  • STANDARD-LOAD Standard load
  • CAT-FAIR Fair

Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.

Bridge Snapshot: Buffalo-Willson Rd

The Buffalo-Willson Rd bridge in Stevens, Washington carries Buffalo-Willson Rd over LITTLE PEND OREILLE RIVE. It was built in 1975, making it 51 years old today. The structure is built primarily of prestressed concrete and spans 1 section, stretching 9.8 meters (32 feet) end to end. Daily traffic averages 21 vehicles, placing it in the lower-traffic tier of Washington bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show a deck rating of 7/9, superstructure at 7/9, substructure at 5/9. The weakest component sits in fair condition. All reported major components score above the Poor range.

How Buffalo-Willson Rd compares

▼ 12.0
Load rating vs Washington average (34.0 t; 8,455 of 8,474 rated)
75
Bridges in Stevens · 9 in Poor condition

Age against the county: built in 1975, earlier than 24 of Stevens's 75 bridges with a recorded construction year (32%), against a county median build year of 1971. This is one of the newer structures in its county.

Buffalo-Willson Rd 22.0 t
Washington average (8,455 of 8,474 rated) 34.0 t

Live comparison across Washington bridges with a recorded inventory load rating (8,455 of 8,474 rated).

Buffalo-Willson Rd vs every rated Washington bridge

Inventory load rating (metric tons), FHWA NBI, this state

22 Top 77% higher than 23% of 8,455 bridges

rated Washington bridges, bucketed by value

Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.

Source FHWA National Bridge Inventory · August 2026

Condition Ratings

Deck
7/9
Good (7–9)
Superstructure
7/9
Good (7–9)
Substructure
5/9
Fair (5–6)
Inventory Load Rating
22.0 t
NBI inventory level (metric tons)
Overall Condition
Fair

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Reported 0–9 component ratings from the FHWA NBI. The highlighted component is the lowest reported input to this record’s current condition category; it is not a closure or live crossing-safety decision.

Stevens inventory by recorded NBI category

Exclusive Good/Fair/Poor bands across all 75 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.

Structural Details

Year Built
1975
Material
Prestressed Concrete
Number of Spans
1
Structure Length
9.8 m (32 ft)
Deck Width
8.6 m (28 ft)
Owner
County Highway Agency
Avg Daily Traffic
21 vehicles/day
Structure Number
080356000000000

Condition Analysis

  • The deck (driving surface) is in good condition (7/9), showing no significant deterioration.
  • The superstructure (beams and supports above the deck) is in good condition (7/9), showing no significant deterioration.
  • The substructure (piers and abutments) is in fair condition (5/9), with minor deterioration that may require routine maintenance.

How to read this record

This page shows what the last federal inspection recorded, not whether Buffalo-Willson Rd is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare Buffalo-Willson Rd against other structures in Stevens and across Washington. Washington bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for Buffalo-Willson Rd?

Buffalo-Willson Rd in Stevens, Washington has a deck rating of 7/9, superstructure rating of 7/9, and substructure rating of 5/9 on the FHWA's 0–9 scale.

How often is Buffalo-Willson Rd inspected?

Buffalo-Willson Rd's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 21 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. Buffalo-Willson Rd is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for Buffalo-Willson Rd?

Buffalo-Willson Rd has an NBI inventory load rating of 22.0 metric tons.

Who is responsible for maintaining Buffalo-Willson Rd?

Buffalo-Willson Rd is owned and maintained by County Highway Agency.

How old is Buffalo-Willson Rd and does age affect safety?

Buffalo-Willson Rd was built in 1975, making it 51 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Share this inspection record

Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.

XFacebookLinkedInWhatsAppEmail

Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.