SEABECK HIGHWAY
Carrying SEABECK HIGHWAY over BIG BEEF CREEK
.5 W JCT ANDERSON HILL RD, Kitsap, Washington
Inventory: FHWA NBI 2024 · last ETL August 2026
FHWA NBI record, refreshed with each annual release.
SEABECK HIGHWAY in Kitsap, Washington is rated Fair in the FHWA's 2024 National Bridge Inventory.
Built in 1974, it carries 3 rated components on the inspecting agency's 0-9 scale, and its weakest reported component scores 6. The lowest applicable rating sets the federal condition category, so this Fair result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.
NBI record plate
Structure WA:081937000000000
INTERSTATE-ERA · CONCRETE · LONG-SPAN-RUN · TIED-CTRL · ARTERIAL-ADT · HEAVY-LOAD · CAT-FAIR
- INTERSTATE-ERA 1950–1979
- CONCRETE Concrete
- LONG-SPAN-RUN 4 spans
- TIED-CTRL Tied control
- ARTERIAL-ADT Arterial ADT
- HEAVY-LOAD Heavy load
- CAT-FAIR Fair
Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.
Bridge Snapshot: SEABECK HIGHWAY
The SEABECK HIGHWAY bridge in Kitsap, Washington carries SEABECK HIGHWAY over BIG BEEF CREEK. It was built in 1974, making it 52 years old today. The structure is built primarily of concrete continuous and spans 4 sections, stretching 31.1 meters (102 feet) end to end. Daily traffic averages 6,604 vehicles, placing it in the moderately-trafficked tier of Washington bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show a deck rating of 6/9, superstructure at 6/9, substructure at 6/9. The weakest component sits in fair condition. None of this bridge's reported major components fall into the Poor condition range.
How SEABECK HIGHWAY compares
Age against the county: built in 1974, earlier than 88 of Kitsap's 115 bridges with a recorded construction year (77%), against a county median build year of 1988. Age is not a defect on its own, but it is the population from which future Poor ratings are drawn.
Live comparison across Washington bridges with a recorded inventory load rating (8,455 of 8,474 rated).
SEABECK HIGHWAY vs every rated Washington bridge
Inventory load rating (metric tons), FHWA NBI, this state
46 Top 17% higher than 83% of 8,455 bridges
rated Washington bridges, bucketed by value
Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.
Source FHWA National Bridge Inventory · August 2026
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Reported 0–9 component ratings from the FHWA NBI. The highlighted component is the lowest reported input to this record’s current condition category; it is not a closure or live crossing-safety decision.
Kitsap inventory by recorded NBI category
Exclusive Good/Fair/Poor bands across all 115 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.
Structural Details
- Year Built
- 1974
- Material
- Concrete Continuous
- Number of Spans
- 4
- Structure Length
- 31.1 m (102 ft)
- Deck Width
- 12.6 m (41 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 6,604 vehicles/day
- Structure Number
- 081937000000000
Condition Analysis
- • At 6/9, the deck (driving surface) shows fair condition, with minor wear flagged for upkeep.
- • The superstructure (beams and supports above the deck) rates fair at 6/9, minor deterioration that routine maintenance should address.
- • At 6/9, the substructure (piers and abutments) shows fair condition, with minor wear flagged for upkeep.
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether SEABECK HIGHWAY is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare SEABECK HIGHWAY against other structures in Kitsap and across Washington. Washington bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for SEABECK HIGHWAY?
SEABECK HIGHWAY in Kitsap, Washington has a deck rating of 6/9, superstructure rating of 6/9, and substructure rating of 6/9 on the FHWA's 0–9 scale.
How often is SEABECK HIGHWAY inspected?
SEABECK HIGHWAY's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 6,604 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. SEABECK HIGHWAY is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for SEABECK HIGHWAY?
SEABECK HIGHWAY has an NBI inventory load rating of 46.0 metric tons.
Who is responsible for maintaining SEABECK HIGHWAY?
SEABECK HIGHWAY is owned and maintained by County Highway Agency.
How old is SEABECK HIGHWAY and does age affect safety?
SEABECK HIGHWAY was built in 1974, making it 52 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Share this inspection record
Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.
Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.