FHWA NBI 2024 Inspection record Public-domain dataset

180th St. SE

Carrying 180th St. SE over Thompson Creek

0.3 E SR527, Snohomish, Washington

Inventory: FHWA NBI 2024 · last ETL August 2026

FHWA NBI record, refreshed with each annual release.

Good
23 t Inventory load rating Lower than 76% of rated Washington bridges

180th St. SE in Snohomish, Washington sits above 24% of rated Washington bridges on inventory load rating (23 t), while its 2021 build year is earlier than 2% of Snohomish's recorded-year cohort (500 bridges).

180th St. SE in Snohomish, Washington is rated Good in the FHWA's 2024 National Bridge Inventory. Built in 2021, it carries 1 rated component on the inspecting agency's 0-9 scale, and its weakest reported component scores 8. The lowest applicable rating sets the federal condition category, so this Good result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.

NBI record plate

Structure WA:089212000000000

POST-2000 · CONCRETE · SINGLE-SPAN · CULVERT-LED · HEAVY-ADT · STANDARD-LOAD · CAT-GOOD

  • POST-2000 2000+
  • CONCRETE Concrete
  • SINGLE-SPAN Single span
  • CULVERT-LED Culvert-led
  • HEAVY-ADT Heavy ADT
  • STANDARD-LOAD Standard load
  • CAT-GOOD Good

Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.

Bridge Snapshot: 180th St. SE

The 180th St. SE bridge in Snohomish, Washington carries 180th St. SE over Thompson Creek. It was built in 2021, making it 5 years old today. The structure is built primarily of concrete and spans 1 section, stretching 6.9 meters (23 feet) end to end. Daily traffic averages 11,759 vehicles, placing it in the heavily-trafficked tier of Washington bridges. It is owned and maintained by County Highway Agency.

The latest FHWA inspection records show culvert at 8/9. The weakest component sits in good condition. No reported major component scores in the Poor range under the current federal condition thresholds.

How 180th St. SE compares

▼ 11.3
Load rating vs Washington average (34.0 t; 8,455 of 8,474 rated)
500
Bridges in Snohomish · 20 in Poor condition

Age against the county: built in 2021, earlier than 8 of Snohomish's 500 bridges with a recorded construction year (2%), against a county median build year of 1979. This is one of the newer structures in its county.

180th St. SE 22.7 t
Washington average (8,455 of 8,474 rated) 34.0 t

Live comparison across Washington bridges with a recorded inventory load rating (8,455 of 8,474 rated).

180th St. SE vs every rated Washington bridge

Inventory load rating (metric tons), FHWA NBI, this state

23 Top 76% higher than 24% of 8,455 bridges

rated Washington bridges, bucketed by value

Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.

Source FHWA National Bridge Inventory · August 2026

Condition Ratings

Culvert
8/9
Good (7–9)
Inventory Load Rating
22.7 t
NBI inventory level (metric tons)
Overall Condition
Good

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Snohomish inventory by recorded NBI category

Exclusive Good/Fair/Poor bands across all 500 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.

Structural Details

Year Built
2021
Material
Concrete
Number of Spans
1
Structure Length
6.9 m (23 ft)
0
Owner
County Highway Agency
Avg Daily Traffic
11,759 vehicles/day
Structure Number
089212000000000

How to read this record

This page shows what the last federal inspection recorded, not whether 180th St. SE is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare 180th St. SE against other structures in Snohomish and across Washington. Washington bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for 180th St. SE?

180th St. SE in Snohomish, Washington on the FHWA's 0–9 scale.

How often is 180th St. SE inspected?

180th St. SE's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 11,759 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. 180th St. SE is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for 180th St. SE?

180th St. SE has an NBI inventory load rating of 22.7 metric tons.

Who is responsible for maintaining 180th St. SE?

180th St. SE is owned and maintained by County Highway Agency.

How old is 180th St. SE and does age affect safety?

180th St. SE was built in 2021, making it 5 years old.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Share this inspection record

Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.

XFacebookLinkedInWhatsAppEmail

Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.