RTE 20
Carrying RTE 20 over NORMANS KILL
0.2 MI NW JCT RTS 7 & 20, Schenectady, New York
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: RTE 20
The RTE 20 bridge in Schenectady, New York carries RTE 20 over NORMANS KILL. It was built in 1929, making it 97 years old today. The structure is built primarily of concrete and spans 1 section, stretching 9.1 meters (30 feet) end to end. Daily traffic averages 5,708 vehicles, placing it in the moderately-trafficked tier of New York bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show superstructure at 5/9, substructure at 6/9. The weakest component sits in fair condition. No reported major component scores in the Poor range under the current federal condition thresholds. Its NBI inventory load rating is 19.5 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How RTE 20 compares
Live comparison across New York.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1929
- Material
- Concrete
- Number of Spans
- 1
- Structure Length
- 9.1 m (30 ft)
- Deck Width
- 11.9 m (39 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 5,708 vehicles/day
- Structure Number
- 000000001015940
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗Condition Analysis
- • At 5/9, the superstructure (beams and supports above the deck) shows fair condition, with minor wear flagged for upkeep.
- • The substructure (piers and abutments) is in fair condition (6/9), with minor deterioration that may require routine maintenance.
How to read this record
This page shows what the last federal inspection recorded, not whether RTE 20 is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare RTE 20 against other structures in Schenectady and across New York. New York bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for RTE 20?
RTE 20 in Schenectady, New York, superstructure rating of 5/9, and substructure rating of 6/9 on the FHWA's 0–9 scale.
How often is RTE 20 inspected?
RTE 20's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 5,708 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. RTE 20 is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for RTE 20?
RTE 20 has an NBI inventory load rating of 19.5 metric tons.
Who is responsible for maintaining RTE 20?
RTE 20 is owned and maintained by State Highway Agency.
How old is RTE 20 and does age affect safety?
RTE 20 was built in 1929, making it 97 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.